Quadracer Postman Racing Frame


$89.00

The Postman - if you send it, it will deliver!

For designer Luke Godeassi (aka Tilted FPV), the Postman is the culmination of years of experience in designing, flying and maintaining racing drones. After almost a year in development, where the design was rigorously tested and painstakingly refined, the frame is now ready to land in the hands of racers everywhere. So, the Postie is ready to deliver! Are you ready to send it?

Proudly manufactured by Quadracer and Mint3D using high quality carbon fibre and 3D printing materials.

FRAME KIT INCLUDES 6 ARMS

Key features:

High performance and consistent flight dynamics
The sleek design provides great aerodynamics with minimal drag
The 'anti-wiggle' TPU inserts keep the arms under a constant lateral compression, minimising arm wiggle in flight, even if your arm screws loosen.
The inserts also reduce vibration transmission to the gyro, resulting in a very wide tuning envelope and the ability to reduce filtering within the flight controller
High torsional ('twisting') rigidity thanks to the longer body with shorter arms, results in excellent flight performance, even with beaten up arms that are starting to delaminate.
Unique wire and antenna routing solution
motor wire and battery wire routing system with strain-relief engineered in, so ripping pads off your electronics in a crash is a thing of the past
under body Crossfire Immortal T mount for excellent reception and minimal chance of damage during crashes
VTx antenna mounting behind the 'turtle-mode' fin to protect it from damage in crashes whilst keeping it optimally positioned for reception
The ultimate in ease of maintenance
remove one arm screw and loosen the other to remove an arm.
remove just 2 screws to 'pop the hood' and have access to all electronics
pop-out TPU for zero screw access the camera for focus or angle adjustment
Sensible durability
TPU mounted rollcage is designed to absorb shock and impacts from big crashes, keeping the sensitive electronics housed safely within
Best-in-class camera protection with the camera sitting behind the carbon of the rollcage
Tough 5mm arms are able to withstand a lot of abuse, but have also been carefully designed to break in favour of snapping a body plate or obliterating a motor, both of which are more expensive and time consuming to replace
And more!
Designed for the new generation of high performance and reliable 20x20 electronics, this frame has performed exceptionally with the Talon FC and ESC
Mix and match colours of the 3D-printed components to create a look that is all your own.

Specifications

Frame weight

Carbon + hardware: 61.6g
3D Printed components: 17.9g

Supported components

Cameras
Any micro sized FPV camera (e.g. Foxeer Predator Micro or Runcam Racer)
FPV antennas:
TrueRC Singularity, Lumenier AXII Micro (fit directly into TPU cup)
TBS Triumph Pro stubby, TrueRC Singularity stubby (screw into cup via SMA pigtail)
ESCs
Talon Gigawatt V2 4in1 20x20 35A 6S ESC
Aikon AK32PIN 4in1 20x20 35A 6S ESC
Any other similarly sized 20x20 4in1 ESC
Flight Controller

Any standard sized 20x20 FC
Talon F7 Fusion
VTx
Rush Tiny Tank
TBS Unify 5V
TBS Unify Pro Nano 5G8
Any similarly sized VTx
Receiver
TBS CRSF Nano Rx
Any similarly sized Rx
Other notes
The Postman is designed to have a 2 level stack (4in1 ESC + FC) and with the VTx and receiver positioned on top.

Exploded Diagram:

List Price: $89.00
Price: $89.00
SKU: QR-Postman


In Stock: Sorry bro, Sold out