New Bits

AXII-U.FL 5.8ghz RHCP CP Antenna


$28.95

An AXII 5.8GHz antenna with a flexible coax and miniature U.FL(ipx) connector for the lightest weight possible. Direct connection to your TBS unify or IRC tramp Vtx further reduce weight by skipping the sma pigtail.

SPECIFICATIONS;

Gain: 1.6dbic
Axial ratio: 1.0 (near perfect)
Bandwidth: 5.5GHz-6.0GHz
Weight: 1.6g
Size: 70mm x 16mm
Cable: Flexible RG178
Connector: U.fl
RHCP
INCLUDES;

1 x AXII-U.FL 5.8ghz RHCP CP Antenna

List Price: $28.95
Price: $28.95
SKU: AXII-UFL-RH


In Stock: Sorry bro, Sold out

FMR AirSafe Travel Locker Lipo Bag


$11.95

There’s nothing exciting about lipo safety - however, if you aren’t already using a lipo safe bag then they are a must.

The FMR AirSafe is almost double the thickness of a standard lipo bag offering better protection in case of fire - we’ve tested the AirSafe already with a 1550 4s and the bag stood up perfectly to the test.

The FMR AirSafe also features a pouch for ID/Business card, is airport friendly with rules and regulations printed clearly for security staff, loop section for throwing your cell checker onto (hook with sticky back is required for the cell checker) all wrapped in super stylish FMR team pilot fashion.

Specifications;

Size (mm): 230x300x10 (approx)

List Price: $11.95
Price: $11.95
SKU: FMRLIP001


In Stock: Totally in stock right now

FMR F25 2205 2500KV - (1pcs)


$14.95

FMR brings you a solid, workhorse motor at a very reasonable price!

With active cooling fins, 5mm hollow stainless steel shaft for extra strength, N52H magnets and extra dolphin power, these bad boys won't break the bank but still give great bang for buck.

Features:

N52H Magnets
99.99 Oxygen Free Copper
Stainless Steel Hollow shaft
Specifications:

Model: FMR F25 2205 2500KV
Stator diameter: 22mm
Stator thickness: 5mm
Configuration 12N14P
KV (rpm/volt): 2500kv
Shaft diameter: 5mm
Current: 0.9A/10V
Internal resistance: 45mΩ
Max pull: 1100g
Max power: 473W
No. of Cells: 3-4S
Recommended ESC: 20-30A
Wire Length: 120mm
Size: 32.8 * 27.7mm
Weight: 33g

Package Includes:

1 x FMR F25 2205 2500KV Brushless Motor
1 x Motor Accessory Set

List Price: $14.95
Price: $14.95
SKU: FMR22052500D


In Stock: Totally in stock right now

XT60 SmokeStopper Tool


$14.95

XT60 SmokeStopper - Termed the SmokeStopper by RCgroups member mnemennth, this handy device could save you from damaging expensive electronic components

We've all been there... Working all day on a new build, you finally finish, you give your new beast one final look-over and don't see anything wrong. So you plug it in and TZZZT! SNAPP! POP! and instantly, your plans for new-found aerial bliss disappear literally in a puff of smoke.

You tear it down and find a blown ESC caused by a motor with a too-long screw into a winding or a little blob of solder that you SHOULD have caught before you put the new shrink-wrap on, but DIDN'T.

Now you have to tear it apart and replace the toasted ESC before you can even see if the motor is salvageable. You already know you're going to be ordering a new one shortly; the only difference is whether you're going have to wait for it to come in the post or if you ordered enough to have a spare and will need to replace it.

List Price: $14.95
Price: $14.95
SKU: ACC001121


In Stock: Totally in stock right now

FrSKY M9-R Hall Sensor Gimbal for Taranis X9D & X9D Plus (1pcs)


$33.95

FrSky M9-R Gimbal is specially designed for FPV racing, 3D and acrobatic fixed wing and 3D Heli pilots who are using the FrSky Taranis X9D/X9D Plus Transmitter.

The 45°throttle travel will allow you to achieve a quick throttle response resulting in precision control. The combination of a hall sensor gimbal and included lotus stick ends will assure that your thumbs or fingers are with one with the radio. It has a red metal body to give it that race-ready look.

Please Note: Purchase is for 1 x Gimbal

Specifications;

Supply Voltage (VCC): DC 3.0 ~ ±5V
Sensitivity: 2.50 mV/G
Linear Output Voltage Range: 0.1 ~ (VCC +0.1) V
Quiescent Output (TA = 25°C, B = 0 G): 0.5 × VCC
Noise (no load): ≤40mVpp
Features;

45°throttle travel for quick throttle response
Hall sensor
4 ball-bearings
Adjustable tension
Ideal for FPV RACING, 3D and acrobatic fixed wing, 3D Heli

List Price: $33.95
Price: $33.95
SKU: FrSKY-04100061


In Stock: Totally in stock right now

Tattu R-Line V2 1550mAh 100C 4S1P Lipo Battery Pack


$46.95

Tattu R-Line V2 1550mAh 100C 4S1P Lipo Battery Pack
Tattu R-Line Version 2.0 1550mAh 100C 4S1P High Voltage LiPo battery pack is the updated version of R-Line series. Tattu R-Line High Voltage series of LiPo batteries hold a higher voltage charge per cell, which results in more potential power for your FPV. Each cell can be safely charged to 4.35v per cell, up from the standard 4.2v per cell.

What is R-Line? R-Line is a brand new product line specifically designed for professional FPV racing competitions. It's the selling version of Toppilot batteries. It's also a subsidiary of the Tattu brand. It's got higher capacity, lower internal resistance, and lower landing temperatures. They are more powerful than any graphene battery. Generally, R-Line batteries have the same specs as our popular Toppilot batteries. There are different R-Line versions for the needs of different FPV racing competitions.

Features:

High quality, reliable power
Stable automatic stacking technology enables single cell capacities of 1550mAh
Higher charge voltage than standard lipos: 3.8V(one cell)
Higher capacity than comparable size packs
Very high C rate. Designed for professional FPV racing
No memory effect

Specifications:

Minimum Capacity: 1550mAh
Configuration: 4S1P / 15.2V / 4Cells
Discharge Rate: 100C
Max Burst discharge Rate: 200C
Net Weight(±20g): 187g
Dimensions:75mm Length x 35.5mm Width x 38mm Height
Charge Plug: JST-XHR
Discharge Plug: XT60

Lipo Battery Safety

Batteries should NEVER be left unattended while charging.
Be absolutely sure that the Lithium Polymer charger settings are correct for the battery pack being charged – both voltage and current settings.
Lithium Polymer must be CHARGED and STORED in a fire-safe container like a Lipo Sack.
Do not charge batteries near flammable items or liquids.
Keep a dry fire extinguisher nearby or a large bucket of dry sand, which is a cheap and effective extinguisher.
Never charge inside an automobile even when parked.
KEEP BATTERIES AWAY from children and pets at ALL times.
Never discharge below 3.5V per cell as it may cause permanent damage and void warranty
Battery may explode if damaged or disposed of in fire
Never leave batteries inside a car on a hot day or any other place where temperature may exceed 140F / 60C.
Although environmentally friendly, lithium polymer cells must be FULLY discharged before disposal. Use a resistor setup (light bulbs, for example) to accomplish this, to avoid the possibility of a short-induced fire after disposal.
Immediately discharge damaged batteries at 1/2 C rate and dispose
Do not put the loose cells in a pocket, bag, or drawer where they could short-circuit against other items, or the battery tabs could be pressed against each other.
Take care that the cells are not punctured, especially by metallic objects like hobby knives.
If the electrolyte in the cells should get on your skin, thoroughly wash with soap and water. If in the eyes, rinse thoroughly with cool water. Immediately seek medical attention for this, or for burns.

List Price: $46.95
Price: $46.95
SKU: TA15504S100


In Stock: Sorry bro, Sold out

Tattu R-Line V2 1300mAh 100C 4S1P Lipo Battery Pack


$40.95

Tattu R-Line V2 1300mAh 100C 4S1P lipo battery pack
Tattu R-Line Version 2.0 1300mAh 100C 4S1P High Voltage LiPo battery pack is the updated version of R-Line series. Tattu R-Line High Voltage series of LiPo batteries hold a higher voltage charge per cell, which results in more potential power for your FPV. Each cell can be safely charged to 4.35v per cell, up from the standard 4.2v per cell.

What is R-Line? R-Line is a brand new product line specifically designed for professional FPV racing competitions. It's the selling version of Toppilot batteries. It's also a subsidiary of the Tattu brand. It's got higher capacity, lower internal resistance and lower landing temperatures. They are more powerful than any graphene battery. Generally, R-Line batteries have the same specs as our popular Toppilot batteries. There are different R-Line versions for the needs of different FPV racing competitions.

Features:

High quality, reliable power
Stable automatic stacking technology enables single cell capacities of 1300mAh
Higher charge voltage than standard lipos: 3.8V(one cell)
Higher capacity than comparable size packs
Very high C rate. Designed for professional FPV racing
No memory effect

Specifications:

Minimum Capacity: 1300mAh
Configuration: 4S1P / 15.2V / 4Cells
Discharge Rate: 100C
Max Burst discharge Rate: 200C
Net Weight(±20g): 163g
Dimensions:75mm Length x 35.5mm Width x 33mm Height
Charge Plug: JST-XHR
Discharge Plug: XT60

Lipo Battery Safety

Batteries should NEVER be left unattended while charging.
Be absolutely sure that the Lithium Polymer charger settings are correct for the battery pack being charged – both voltage and current settings.
Lithium Polymer must be CHARGED and STORED in a fire-safe container like a Lipo Sack.
Do not charge batteries near flammable items or liquids.
Keep a dry fire extinguisher nearby or a large bucket of dry sand, which is a cheap and effective extinguisher.
Never charge inside an automobile even when parked.
KEEP BATTERIES AWAY from children and pets at ALL times.
Never discharge below 3.5V per cell as it may cause permanent damage and void warranty
Battery may explode if damaged or disposed of in fire
Never leave batteries inside a car on a hot day or any other place where temperature may exceed 140F / 60C.
Although environmentally friendly, lithium polymer cells must be FULLY discharged before disposal. Use a resistor setup (light bulbs, for example) to accomplish this, to avoid the possibility of a short-induced fire after disposal.
Immediately discharge damaged batteries at 1/2 C rate and dispose
Do not put the loose cells in a pocket, bag, or drawer where they could short-circuit against other items, or the battery tabs could be pressed against each other.
Take care that the cells are not punctured, especially by metallic objects like hobby knives.
If the electrolyte in the cells should get on your skin, thoroughly wash with soap and water. If in the eyes, rinse thoroughly with cool water. Immediately seek medical attention for this, or for burns.

List Price: $40.95
Price: $40.95
SKU: TA13004S100


In Stock: Totally in stock right now

DALPROP Cyclone T5045C Cyclone 5" 3 Blade Props (20pcs) - Crystal Red


$15.00

Dalprop high-end CYCLONE series, features faster reaction, easier cornering and less noise, excellent aerodynamics design make them ideal for drone racing. 5mm inner diameter,more durable,survive from crashes

Available in packs of 20pcs (10CW & 10CCW / 5 sets of 4)

List Price: $15.00
Price: $15.00
SKU: T5045CR


In Stock: Totally in stock right now

Team Blacksheep Unify Pro 5G8 HV (SMA)


$64.95

New and 6S capable version, with 5V output for your FPV camera.
Fully SmartAudio compatible - additional features include TBS CleanSwitch and TBS PitMode.Antenna Connector: SMA Female Socket

The most popular, most powerful video transmitter on the market just got a "bigger" brother. It can be connected directly to up to 6S of battery-juice and do 5V output for your camera. It will filter the power and make sure you get clean video, even without being connected to a TBS CORE or TBS PowerCube. With a brand new active output power monitor, we ensure that you'll always meet the race requirements, while giving you the best possible picture.

With only 7g and a 31x22x6mm form factor, your quad will barely notice it's there. The 25mW - 800mW adjustable output power allows you to race with friends and penetrate serious concrete with just a few pushes of a button. The 40CH coverage gives you the freedom to fly at any race without having to resort to video transmitter swapping practices (*).

PITMODE - MADE TO RACE
Zero interference even while powered up, it's now a possibility! If you've ever repaired a quad during a race, you'll know the frustrations of not being able to power on and test your system. With PitMode, we will reduce the output power to a bare minimum (way below single digit mW's), and move to frequencies unused by race organizers, to allow you to power up your quad and still see the image! You've got a few meters of range to put your quad through its paces before placing it on that starting grid, and in combination with CleanSwitch you can power on as soon as your channel is available without interrupting any of the active channels.

SMARTAUDIO - FULL CONTROL
SmartAudio technology provides UART and I2C control for your entire video transmitter. Parameters such as output power, bands, channels and frequency can be freely controlled. This enables remote channel control directly from a smart device (TBS Crossfire, external bluetooth or wifi module required), from your radio (TBS Crossfire with TBS Tango or OpenTX compatible remote required), or from the OSD (e.g. TBS CORE PRO). With all these options available, you ought to find something that fits your bill. Together with CleanSwitch, the sky is the limit ... jump between channels without interfering fellow pilots in air, create backup-/emergency-frequencies, global VTx power adjustments by race organizers or other clever systems aimed at streamlining and improving race management are now a possibility!

CLEANSWITCH - NEIGHBOR FRIENDLY
CleanSwitch is a technology developed at TBS that will ensure that your video transmitter is interference-free while powering on, or while changing channels. All current video transmitters swipe across the entire band while being powered on, often resulting in flickering and heavy interference to anyone in the air, regardless of video channel chosen. TBS CleanSwitch will allow you to power on and change channels while your buddies are in the air, without any external interference. CleanSwitch is race friendly, and pilot friendly ... that's how we like it at TBS :)

SAY NO! TO DIPSWITCHES
Even though learning binary was a fun mind-game, in practice a single-push-button or OSD-controlled video transmitter is just much easier to operate. Gone are the days of video transmitter cards, stepping on people's channels by mistake, or a mismatch between your goggle and video transmitter frequencies.

SPECIFICATIONS
Operating Voltage: 2S - 6S
Supply current: up to 600mA
Operating Temperature: watch for normal airflow
Audio carrier Frequency: 6.5 MHz
Video Input Impedance: 75 Ohm
Weight: 7g (with SMA, without antenna)
Antenna Connector: SMA Female Socket with screw mounting holes
Video Format: NTSC/PAL
Output Power: 13dBm (25mW), 23dBm (200mW), 27dBm (500mW), 29dBm (800mW*)
INCLUDED
TBS UNIFY PRO 5G8 HV Video transmitter
Video Transmitter / Camera / Power cable
TBS UNIFY Pro Manual

* HAM license is required for operation on HAM channels, and HAM power levels! The VTx ships with only legal channels enabled, please consult the manual on unlocking procedure.

List Price: $64.95
Price: $64.95
SKU: TBS-1025


In Stock: Totally in stock right now

Kraken Battery Strap Bracket V2


$16.00

Customised CNC aluminium battery strap brackets and strap for the Kraken. Unlike other unbreakable straps, the material has a small amount of stretch and incorporates a non slip weave to ensure your battery is held firm without crushing your battery.

The bracket fits all krakens and attaches to the outer arm mount holes. Note that you may need to use a longer screws.

These are the V2 version with:

- 7075 aluminiun
- replaceable strap
- countersunk screws
- bonus strap included

List Price: $16.00
Price: $16.00
SKU: BLT-KRAKEN-BATT-STRAP-V2


In Stock: Totally in stock right now