New Bits

HGLRC XJB F428-TX20 Omnibus F4 Flight Controller 28A 2-4S Blheli_S ESC Switchable VTX


So much power in such a small package!

The XJB stack represents incredible value, all jam-packed into a 20x20 format. Featuring betaflight OSD, switchable VTX with pitmode and a clean non swamping signal. 28A 4in1 ESC and enough CPU power to run 8k x 8k!


Model: HGLRC XJB F428-TX20
Weight: 6.5g
Usage: for 65mm-250mm Frame Kit
Micro F4 Flight Controller Board (with D-SHOT)

CPU: STM32F405RGT6, dual 8K.
Betaflight target: OMNIBUSF4
Black Box: Flash 16M
Input Voltage: 2-4S Lipo
Built-in Betaflight OSD to adjust PID
BEC Output: 5V@3A
Size: 25x25mm board, 20mm mounting holes (M2)
Supports SBUS/PPM/DSMX receivers

28A 2-4S Blheli_S BB2 4 in 1 ESC:

Input Voltage: 2-4S Lipo battery
Constant Current: 28A
Peak Current: 35A
Firmware: BLheli_S 16.5
Size: 27x27mm (mainboard)
31x31mm ( including pad)
Installing Hole: 20x20mm, M2
Weight: 4.2g
Firmware: BL-Heli 16.5
Supports, Damped Mode, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, forward and reverse
HGLRC XJB-TX20 Mini FPV Transmitter

Output power: 0/25mW/100mW/250mW switchable
BAT: 7-24V,BEC 5V-3A
Video system: NTSC/PAL
Antenna: IPEX
Frequency: 5.8GHz 9 bands 72 channels, with Raceband
Size: 23*23mm(L*W),Hole:20*20mm
Weight: 2.2g
Package Includes:

1x HGLRC F4 AIO OSD BEC Flight Controller Board
1x HGLRC 28A Blheli_S 4 In 1 ESC
1x HGLRC XJB-TX20 Mini FPV Transmitter
1 x IPEX Dipole Antenna
1 x Standoff Kit
Warning: As with all video transmitters, do not power up the unit unless you have the antenna connected. Powering up a video transmitter with the no antenna will destroy the transmitter.

Note: Incorrect soldering techniques will damage this board and possibly void warranty. Please use the correct sized tip, temperature and technique. Temp controlled soldering irons (such as the TS100) are available for under $100 and will make soldering much easier.

List Price: $94.95
Price: $94.95

In Stock: Totally in stock right now

HGLRC 28A 4in1 ESC Replacement


HGLRC 28A 4in1 ESC Replacement for F325, F328, F425 and F428.

Size: 20X20MM

List Price: $48.95
Price: $48.95

In Stock: Sorry bro, Sold out

Team Black Sheep Crossfire Micro TX


The Crossfire module boiled down to its pure essence for long range up to 40km, and FPV racers that need ultra-low latency.


The TBS CROSSFIRE is a long range R/C link based on the newest RF technology, capable of self-healing two-way communications and range beyond comprehension. With a sensitivity of -130dB, full RF-side diversity, tiny receivers for FPV quads, the TBS CROSSFIRE contains the most modern technology to provide a superior long-range control link.

Remote control links, however, are tasked with much more than range. Latency, telemetry, robustness against interference, ease of use and the overall finish are too often sacrificed for that last bit of range. The Crossfire comes with plenty of range, and uses that margin for additional functionality and reliability. A bright future for FPV lies ahead :)


The Crossfire Micro TX borrows the core technology from its larger brother, but is a JR-module transmitter simplified to the most sought-after features, at a killer price! For people looking to do extreme long range flights beyond 15-20km, the Crossfire TX is still the way to go. For anyone looking to penetrate buildings, fly mini quads or just explore your surroundings a few kilometers away, the Micro TX is the perfect companion. It will still go out up to 40km, just like its bigger brother. But it costs less than half the price.


Apart from unparalleled range, the thing that we are most proud of on the TBS CROSSFIRE is that it just works. In the past, our question always was "could our R/C link keep up?". With the TBS CROSSFIRE comes peace of mind. But don't take our word for it. All leading drone racing organizers require pilots to fly the TBS Crossfire. All top drone racers fly the TBS Crossfire. The furthest long-range missions are flown with TBS Crossfire. Now it has become affordable to the masses as a general purpose radio link!


As a modern R/C link, it has telemetry built in. Two-way communication opens up new possibilities. From streaming MAVLink to your smart device (no Mavlink stream support for Crossfire Micro TX!), to updating your firmware, setting your video transmitter channel or adjusting flight control parameters such as PIDs. Adaptive bandwidth controls the speed of transmission or optimizes for the ultimate range. CRSF is a proprietary TBS communication protocol between the Crossfire and R/C and Flight Control. It provides ultra-low latency with incredible bandwidth (3x faster, 6x more data than any comparable protocol!). With such tight integration, the TBS Crossfire is the logical choice for anyone flying Betaflight, KiSS or ArduPilot/Pixhawk platforms.

Download the manual
Download TBS Crossfire Micro TX Quickstart Guide
Download TBS Agent (software updates)

Long range, adaptive and robust remote control system for your aircraft
Immune to onboard noise
Two-way communication link with real-time link vitals and telemetry
Self-healing & frequency hopping (DSSS, FHSS)
Adaptive bandwidth control and range optimization
Serial Modem capable of transmitting MAVLink or other serial protocols (up & downlink)
RX beacon mode to recover your downed aircraft
Super easy binding and configuration via built-in display of your R/C
Low latency, 150Hz update rate (3x faster than typical RC links) control for perfect immersive feeling
Two receiver models: 8 port Diversity Rx, 4 port Mini-receiver (4g weight!)
8 or 12ch output via SBUS/PPM/CRSF on both receivers
Ability to fly with multiple friends at the same time (10 or more)
Selectable RF power from 10mW to 100mW (local restrictions apply)
Transmitter LED shows link health
Micro-receiver for smaller drones. Smaller than you think!
Software updates via RF Link

Frequency Bands: 868MHz (EU, Russia) / 915MHz (USA, Asia, Australia)
Input Voltage: 3.5 - 13V
Power consumption: 1.1W (@10mW) - 2W (@100mW)
Dimensions: 65 x 48 x 22 mm (JR module size)
Weight: 48g

TBS Crossfire Micro Transmitter (JR module)
TBS Crossfire Stock Tx Antenna


TBS Crossfire - FCC Certificate Part 15C
TBS Crossfire - FCC Certificate Part 15B
TBS Crossfire - FCC DOC

Notice: The use and operation of this product in the Australia and many other countries may require an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that you comply with the rules and regulations regarding radio transmitters in your country. NextFPV is not responsible for your actions if you choose to use this product.

List Price: $145.90
Price: $145.90

In Stock: Totally in stock right now

FrSKY R-XSR 2.4GHz 16CH ACCST Micro Receiver w/ S-Bus & CPPM


The FrSky ultra mini receiver R-XSR is the evolution of the popular full range XSR receiver.

The R-XSR is a standalone receiver with all the functionality of the full-size XSR (including telemetry) but at 1/3 size and weight of XSR receiver. The R-XSR also has an integrated diversity with 2x antennas for a solid RC link, and the IPEX connector makes it convenient to replace antennas.


Ultra mini size and lightweight
Support telemetry and Smart Port enabled
Full range
Switchable SBUS/ CPPM signal output
Supports redundancy function
IPEX connector, replaceable antennas

Dimension: 16*11*5.4mm (L*W*H)
Weight: 1.5g
Number of channels: 16CH (1-16CH from SBUS channel, 1~8CH from CPPM channel)
Operating Voltage Range: 4~10V
Firmware Upgradable
Compatibility: FrSky X Series modules and radios in D16 mode - (not EU_LBT)

List Price: $28.95
Price: $28.95

In Stock: Sorry bro, Sold out

Team Black Sheep Crossfire Diamond Antenna


A slightly-directional antenna for best signal penetration. Built ultra-durable using lessons learned from TBS Triumph, and designed by none other than IBCrazy

Antenna orientation, wear & tear, and non-directionality have been the source of some range issues with our long range and mini quad pilots. We, therefore, sat down with IBCrazy and he designed this antenna to be as durable as possible. A diamond lasts forever!

With a slight directionality to give you more range when flying in front of you, but still, maintain a solid link when flying behind you. The antenna uses the ground you are standing on to reflect and therefore boost your signal out beyond what traditional antennas can manage.

The story behind the Diamond antenna:

A few pilots were experiencing drop-outs at what seemed to be random times. I investigated 4 cases an found that all the dropouts were happening all at the same relative azimuth. it was apparent that conductive ground was causing a null between the 0-5 and 15-20 degree azimuth. This wasn't a Crossfire problem at all! I was a problem with the ground they were standing on!

To fix this, I designed an antenna that not only would resist the effect of ground, but would track along the ground for low altitude flying. To do this a balanced closed loop structure was needed. The result was the TBS Diamond antenna."

-- Alex "IBCrazy" Greve, Dec 9th, 2017`


Connector: SMA Male
Weight: 20.6g
Size: 135 x 120 mm
Gain: 2.88dB
Frequency: 850 - 950MHz
Suggested for: TBS Crossfire TX or TBS Crossfire Micro TX
Designed by and manufactured in cooperation with Video Aerial Systems, IBCrazy.

List Price: $36.90
Price: $36.90

In Stock: Totally in stock right now

AXII-U.FL 5.8ghz RHCP CP Antenna


An AXII 5.8GHz antenna with a flexible coax and miniature U.FL(ipx) connector for the lightest weight possible. Direct connection to your TBS unify or IRC tramp Vtx further reduce weight by skipping the sma pigtail.


Gain: 1.6dbic
Axial ratio: 1.0 (near perfect)
Bandwidth: 5.5GHz-6.0GHz
Weight: 1.6g
Size: 70mm x 16mm
Cable: Flexible RG178
Connector: U.fl

1 x AXII-U.FL 5.8ghz RHCP CP Antenna

List Price: $28.95
Price: $28.95

In Stock: Sorry bro, Sold out

FMR AirSafe Travel Locker Lipo Bag


There’s nothing exciting about lipo safety - however, if you aren’t already using a lipo safe bag then they are a must.

The FMR AirSafe is almost double the thickness of a standard lipo bag offering better protection in case of fire - we’ve tested the AirSafe already with a 1550 4s and the bag stood up perfectly to the test.

The FMR AirSafe also features a pouch for ID/Business card, is airport friendly with rules and regulations printed clearly for security staff, loop section for throwing your cell checker onto (hook with sticky back is required for the cell checker) all wrapped in super stylish FMR team pilot fashion.


Size (mm): 230x300x10 (approx)

List Price: $11.95
Price: $11.95

In Stock: Sorry bro, Sold out

FMR F25 2205 2500KV - (1pcs)


FMR brings you a solid, workhorse motor at a very reasonable price!

With active cooling fins, 5mm hollow stainless steel shaft for extra strength, N52H magnets and extra dolphin power, these bad boys won't break the bank but still give great bang for buck.


N52H Magnets
99.99 Oxygen Free Copper
Stainless Steel Hollow shaft

Model: FMR F25 2205 2500KV
Stator diameter: 22mm
Stator thickness: 5mm
Configuration 12N14P
KV (rpm/volt): 2500kv
Shaft diameter: 5mm
Current: 0.9A/10V
Internal resistance: 45mΩ
Max pull: 1100g
Max power: 473W
No. of Cells: 3-4S
Recommended ESC: 20-30A
Wire Length: 120mm
Size: 32.8 * 27.7mm
Weight: 33g

Package Includes:

1 x FMR F25 2205 2500KV Brushless Motor
1 x Motor Accessory Set

List Price: $14.95
Price: $14.95
SKU: FMR22052500D

In Stock: Totally in stock right now

XT60 SmokeStopper Tool


XT60 SmokeStopper - Termed the SmokeStopper by RCgroups member mnemennth, this handy device could save you from damaging expensive electronic components

We've all been there... Working all day on a new build, you finally finish, you give your new beast one final look-over and don't see anything wrong. So you plug it in and TZZZT! SNAPP! POP! and instantly, your plans for new-found aerial bliss disappear literally in a puff of smoke.

You tear it down and find a blown ESC caused by a motor with a too-long screw into a winding or a little blob of solder that you SHOULD have caught before you put the new shrink-wrap on, but DIDN'T.

Now you have to tear it apart and replace the toasted ESC before you can even see if the motor is salvageable. You already know you're going to be ordering a new one shortly; the only difference is whether you're going have to wait for it to come in the post or if you ordered enough to have a spare and will need to replace it.

List Price: $14.95
Price: $14.95
SKU: ACC001121

In Stock: Totally in stock right now

FrSKY M9-R Hall Sensor Gimbal for Taranis X9D & X9D Plus (1pcs)


FrSky M9-R Gimbal is specially designed for FPV racing, 3D and acrobatic fixed wing and 3D Heli pilots who are using the FrSky Taranis X9D/X9D Plus Transmitter.

The 45°throttle travel will allow you to achieve a quick throttle response resulting in precision control. The combination of a hall sensor gimbal and included lotus stick ends will assure that your thumbs or fingers are with one with the radio. It has a red metal body to give it that race-ready look.

Please Note: Purchase is for 1 x Gimbal


Supply Voltage (VCC): DC 3.0 ~ ±5V
Sensitivity: 2.50 mV/G
Linear Output Voltage Range: 0.1 ~ (VCC +0.1) V
Quiescent Output (TA = 25°C, B = 0 G): 0.5 × VCC
Noise (no load): ≤40mVpp

45°throttle travel for quick throttle response
Hall sensor
4 ball-bearings
Adjustable tension
Ideal for FPV RACING, 3D and acrobatic fixed wing, 3D Heli

List Price: $33.95
Price: $33.95
SKU: FrSKY-04100061

In Stock: Totally in stock right now