Product Search

AXII-U.FL 5.8ghz RHCP CP Antenna (Side Feed)


An AXII 5.8GHz antenna with a flexible coax and miniature U.FL(ipx) connector for the lightest weight possible. Direct connection to your TBS unify or IRC tramp Vtx further reduce weight by skipping the sma pigtail.

SPECS
Gain: 1.6dbic
Axial ratio: 1.0 (near perfect)
Bandwidth: 5.5GHz-6.0GHz
Weight: 1.6g
Size: 70mm x 16mm
Cable: Flexible RG178
Connector: U.fl
Patent pending

$28.95
$28.95


In Stock: Totally in stock right now

Balance Adapter Male JST - Female Polyquest 2S


Balance Adapter Male JST - Female Polyquest 2S

$6.95
$6.95


In Stock: Sorry bro, Sold out

Balance Adapter Male JST- Female ThunderPower 3S


Balance Adapter Male JST- Female ThunderPower 3S

$6.95
$6.95


In Stock: Totally in stock right now

Balance Adapter Male JST- Female ThunderPower 4S


Balance Adapter Female JST- Male ThunderPower 4S

$6.95
$6.95


In Stock: Totally in stock right now

Balance Adapter Male JST- Female ThunderPower 5S


Balance Adapter Male JST- Female ThunderPower 5S

$6.95
$6.95


In Stock: Sorry bro, Sold out

Balance Adapter Male JST- Female ThunderPower 6S


Balance Adapter Male JST- Female ThunderPower 6S

$6.95
$6.95


In Stock: Sorry bro, Sold out

Balance Adapter Male ThunderPower - Female JST 2S


Balance Adapter Male ThunderPower - Female JST 2S

$6.95
$6.95


In Stock: Totally in stock right now

Balance Adapter Male ThunderPower - Female JST 3S


Balance Adapter Male ThunderPower - Female JST 3S

$6.95
$6.95


In Stock: Totally in stock right now

Balance Adapter Male ThunderPower - Female JST 4S


Balance Adapter Male ThunderPower - Female JST 4S

$6.95
$6.95


In Stock: Totally in stock right now

Balance Adapter Male ThunderPower - Female JST 5S


Balance Adapter Male ThunderPower - Female JST 5S

$6.95
$6.95


In Stock: Totally in stock right now

Balance Board Adapter - Polyquest Style


Polyquest style balance board adapter. Suits Hyperion chargers.

$7.95
$7.95


In Stock: Totally in stock right now

Balance Board Adapter - TP/FP/Outrage Style


ThunderPower / FlightPower / Outrage / KongPower style balance board adapter. Suits Hyperion chargers.

$7.95
$7.95


In Stock: Sorry bro, Sold out

Balance Board Adapter - XH/Align/Zippy Style


XH/Align/Zippy style balance board adapter. Suits Hyperion chargers.

$7.95
$7.95


In Stock: Sorry bro, Sold out

Balance Lead Extension - JST-XH 4s 20cm


JST-XH Wire Extension 4S (20cm)
Length: 20cm
The JST-XH plug is used on Dualsky, Align, hexTronik and many other brands of lipo packs.

$3.75
$3.75


In Stock: Sorry bro, Sold out

Balance Lead Extension - JST-XH 5s 20cm


JST-XH Wire Extension 5S (20cm)
Length: 20cm
The JST-XH plug is used on Dualsky, Align, hexTronik and many other brands of lipo packs.

$4.00
$4.00


In Stock: Totally in stock right now

Balance Lead Extension - JST-XH 6s 20cm


JST-XH Wire Extension 6S (20cm)
Length: 20cm
The JST-XH plug is used on Dualsky, Align, hexTronik and many other brands of lipo packs.

$4.20
$4.20


In Stock: Sorry bro, Sold out

BARDWELL F4 FLIGHT CONTROLLER - JBF4 AIO FC W/OSD 3-6S


Joshua Bardwell and RaceDayQuads have come together to make the industry’s next favorite flight controller. With the latest features, a layout which will make your build clean and easy, top notch customer support, and an extremely competitive price, the Bardwell F4 AIO Flight Controller is perfect for your quad!

FEATURES

3-6s F4, AIO board with MPU 6000 gyro
Superb board layout allowing for easy and clean builds
Joshua Bardwell authored manual and selected features, manufactured and backed by RaceDayQuads
Centrally located gyro
Betaflight OSD w/131a current sensor
Compact 30.5x30.5 board layout
9v filtered power out for VTXs – very strong filtering capability for clean video (the 5v output is also filtered)
Power Out: 3x 5v, 1x 3.3v, 1x VBAT, 1x VTX filtered power (9v), 1x Camera filtered power (9v);
4x UARTS for FRSKY, SBUS, IBUS, SAT (2 inverted UARTS)
Smart Audio compatibility and Camera Control capability
Pre-flashed with BF 3.2.2 - Compatible with CLRACINGF4.hex
Programmable LED pin
Buzzer pins
Blackbox capability
No pinned-connectors – all direct solder for optimal durability
Included and installed vibration dampeners
7.29g Weight

MANUAL

$47.00
$47.00


In Stock: Totally in stock right now

Battery Strap 300x25mm - Anti-slip (2pcs)


Simple and effective battery strap with non slip silicone coating.

$8.00
$8.00


In Stock: Sorry bro, Sold out

BDX Twig Racer 5 Inch


The Twig Racer is a new and revolutionary way to look at FPV Racing Frames. Designed to be minimalistic, simple, light and cost effective.

Sitting at the high 20g to sub 30g weight catergory depending on your chosen frame configuration this frame is one to be messed with.

SPECIFICATIONS:

Size: 190mm

Props: 5in

DESIGNED AND MANUFACTURED HERE LOCALLY IN AUSTRALIA

PACKAGE INCLUDES:
4x 4mm Twig Arms
2x 1.5mm Twig Lower Section Plates
1x 1.5mm Twig Top Plate/ Camera Mount
1x Lower Section Nyloc Mounting Plate
2x SPARE 4mm Twig Arms
1x SPARE Top Plate
4x Nylon 35mm Standoffs
4x Nyloc M3 Nut
4x M3 25mm Oxide Steel Screws
4x M3 10mm Oxide Steel Screws

$35.00
$35.00


In Stock: Totally in stock right now

BeastX T-Shirt (XL)


BeastX T-Shirt (XL)

$19.00
$19.00


In Stock: Totally in stock right now

Beta65 Pro BNF 1S Brushless Drone (OSD)


There is a whole lot of crap out there when it comes to brushless micros in the whoop form factor.

We've been really particular about our decision making process in stocking brushless whoops.

The market has recently been inundated by cheap and nasty (but in reality - quite pricey), well, crap.

Traditionally brushless whoops - particularly the 'affordable' ones, had sported brushless motors that have been unreliable and underpowered, sitting on flimsy, fragile frames and driven by flight controllers just too inaccurate to enjoy that locked in feeling you need to hit those tight gaps that make whooping fun!

That is, until now!

We are happy to offer our customers the new and improved upgraded Beta65 pro brushless whoop.

Sporting 19,000kv (Yes! 19,000kv) brushless motors, with innovative new e-clip design to prevent bell fly-offs, mounted on the BEST and most durable brushless whoop frame available - the new and improved BetaFPV 65 pro frame and driven by the brand new BetaFPV F4 flight controller with integrated FrSky SPI long range receiver with OSD, telemetry AND an open UART for Smart Audio. The rock solid BetaFPV Z01 mullet AIO camera provides rock solid, low latency FPV.

All this packed in to the traditional 65mm tiny whoop ducted form factor.

SPARES COMPATIBILITY

Props 31mm - 1mm shaft diameter (shaft diameter is important - brushed props have a 0.8mm diameter and will need to be drilled out to 1mm to be compatible (coming very soon)

Frame BetaFPV Beta 65 Pro frame

Motors 0603

Battery Any tiny whoop "stick" style 1S battery with powerwhoop connector (260-300mah recommended)

Canopy All canopies we stock

THE IMPORTANT STUFF

Frame: 65pro frame
Propeller: 31mm 4-blades propellers (1mm shaft hole)
Motors: 0603 19,000KV
Fligh Controller: BETAFPV F4 1S brushless FC
Firmware version: betaflight_matekf411rx_3.4.0
ESC: 5A/6A preak BLHeli DSHOT600 ESC (integrated with FC)
Camera & VTX: Z01 25mW AIO mullet VTX camera
Battery: 260mAh Lipo HV Battery
Receiver: Built-in Frsky SPI RX
Weight: 23.29g (without battery)
Flight time: 2.5 minutes with 260mAh HV battery

THE COMPONENTS

The flight controller

Comparing the old F3 Brushless FC & the new F4 Brushless FC

CPU: STM32F411CEU6 (100MHZ )
Six-Axis: MPU-6000 triaxial accelerometer / triaxial gyroscope (SPI connection)
Size: 26mm x 26mm, fully compatible with the Inductrix quad frame, Beta65 Pro frame, Beta75 Pro frame, BWhoop B06 frame and mounting pattern
Firmware version: betaflight_matekf411rx_3.4.0
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
Built in SPI Frsky D8 protocol native receiver
Power supply: 1S
ESC Current: 5A continuous and peak 6A (3 seconds)
ESC BLHeliSuite programmable
ESC Factory firmware: O_L_5_REV16_6.HEX
ESC Signal Support: D-shot150, D-shot300, D-shot600, Oneshot125, Multishot, PWM
Power Cable: 55mm, with JST-PH 2.0 connector, AKA PowerWhoop connector
Weight: 4g
What is SPI?
Basically, SPI is a communication protocol like UART, a serial communication protocol. A SPI connection requires 4 wires, while an UART connection only uses 2 (TX and RX). However SPI is faster than UART and places less stress on the processor.

Currently the built in Frsky receiver is compatible with Taranis, Taranis Plus, X9E, Horus X12S, XJT Modules with International Firmware (in D8 mode). Pay attention, this is a SPI connection receiver. In Betaflight Configuration, it should be setted as FRSKY_D receiver in SPI RX mode.

The motors

The frame

The Beta65 Pro BNF sports the new and improved Beta65 Pro frame.

WHAT'S INCLUDED

1 x Beta65 Pro 1S FrSky Brushless BNF micro whoop quadcopter drone
1 x BetaFPV 260mah HV battery

$160.00
$160.00


In Stock: Totally in stock right now

Beta65X 2S Whoop Quadcopter Frsky


Introducing a new era for Whoop micro drones. This 2S Whoop drone has the power to fly real acro, like a larger quad, but is still small enough, safe enough, and quiet enough to fly anywhere.

A team of well respected micro modders have teamed up with BetaFPV to produce this whoop, being involved and consulted on every single step including frame design from scratch, FC and ESC stack design, motor design and prop combinations.

A lot of time and effort by not only those running BetaFPV, but purist hobbyists, has gone in to the research and development of this quad.

A QUICK LOOK

High performing STM32F405 processor FC boards and tuned Betaflight Ominibus 3.5.0 firmware, the Beta65X is ready to bind and fly out of the box without requiring tedious tuning.
Durable and light enough frame is custom produced for the Beta65X. A total assembled weight of 26g gives pilots a good balance of weight and nice punch on 2S voltage.
Fully assembled — no soldering or tinkering necessary. The custom produced 17500kv 0802 motors are the lightest ever produced and replacing them is easy with simple, light-weight, plug and play connectors.
2 x 1S batteries connected in series is configured by default, making this new offering a more affordable upgrade.
THE IMPORTANT STUFF

Weight: 26g (without battery)
Motors: 0802 17,500KV with connector
Props: 31mm 4-blades props, 1mm shaft opening
Camera tilt angle: 35 degrees
FC SPECS

CPU: STM32F405
Six-Axis: MPU6000
Size: 26mm x 26mm, whoop mounting pattern
Firmware version: Betaflight OMNIBUSF4SD (OBSD) 3.5.0
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
Smart Audio port is available for radio control VTX
ESC SPECS

Support BLheli/BLHELI_S suite Pass-through ready
Dshot600 in default
Input voltage: 2S lipo
Cotinuous current: 6A
Peak current: 10A
Firmware: BLHELI_S
Processor: SILABS EFM8BB21F16G
Connector: XT30 or PH2.0 series connector
CAM/VTX SPECS

The whoop comes with a custom split Z02 smart audio AIO cam/vtx by default with a custom designed mount for a 35 degree viewing angle for faster flying.

Output power: 0mW, 25mW and 200mW (switchable)
Smart Audio function is included for radio control out of the box
Antenna: Dipole
Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz
TV System: NTSC
Field of view: 100-120 degrees with 1/4 lens
PROPS OUT
The Beta65X drone also comes with "props out" by default. Why we need "props out" direction?

Default Betaflight props direction, quadcopter dips and "washes out" in hard corners. With reversed props or "props out", no more dipping even in hardest cornering.

POWER CABLE
There is only one choices for the Beta65X - PH 2.0. The two 260mAh Lipo HV 1S batteries can be inserted into the slot in design, as seen below.

CUSTOMED Z02
The AIO camera VTX on the Beta75X is a customed version of Z02. The VTX board and camera board are split and 35 degree camera mount for more fast flying. At the same time, it have all the other function of the Z02 camera, like output power switchable between 0mW, 25mW and 200mW. Smart audio is available for VTX remote control in default.

PACKAGE
1 * Beta65X BNF 2S Whoop Quadcopter
1 * Spare 31mm 4-blades props (2CW+2CCW)
2 * 260mAh 1S batteries - none included with PNP version.
1 * spare canopy

$179.00
$179.00


In Stock: Totally in stock right now

Betaflight F4 Flight Controller


Betaflight F4 is the follow-up design to the very popular BetaflightF3. Following the same path as Betaflight F3 we have kept a very similar footprint in terms of design with a few added modifications. The F405 has replaced the F303 to allow for lower CPU loads.

We have eliminated the 5v/3.3v jumper and added two separate connection points, one for SBUS and one for spektrum users. The jumper still remains for the battery voltage/5v connection for connecting your camera. While wiring the board it is recommended to get power for your VTX either from a different 5v source on the board or if using a higher voltage VTX power it from the battery input coming into the PDB. Running ground loop at AGND with GND wires from camera and VTX is still recommended to give the cleanest video signal.

Another small design change to this board was changing the BEC, this change takes the recommended 5v 2A current limit and drops it down to 5V 1.5A, its a small change but one that we opted for in order to use a more reliable BEC.

BetaflightF4 now comes with telemtry pads for BLHeli32 ESCs these pads are located between the signal and gnd pads for the ESC connections.

Features

Integrated PDB
Built-in OSD customizable via Betaflight OSD
Current sensor
Intuitive layout
Flash memory for blackbox
Tailored to support Betaflight
When running 8K/8K, CPU usage remains low

Specifications

F405 Processor
MPU6000 Gyro/ACC Sensor
BEC Max current 5V 1.5A
Built-in OSD – configurable via Betaflight GUI
Current sensor
Power distribution board with six-layer PCB
OSD Max Current: 145A
Please Note: Correct soldering technique, including appropriate tip size, temperature control, and flux use is essential. Poor soldering technique will void your warranty.

$54.00
$54.00


In Stock: Sorry bro, Sold out

BetaFPV 0603 19000KV Brushless Motors


These motors are the stock motors for the Beta65 Pro 1S brushless drone.

SPECIFICATION
Plug:Micro JST-1.25 3-pins connector
Height: 16.2mm
Width: 9mm
Weight: 1.6g ( with connector)
Shaft: φ1.0mm
KV (rpm/V): 19000KV
Voltage: 3.7-7.4V
Battery: 1S lipo battery (2S is not recommended)
Load Current: 1.8-3.8A
Pull: 23-40g
Power: 6.7-28W
Efficient: 3.4-1.4g/W
Usage: for 1S brushless multirotor like Beta65 Pro or BWhoop B06 etc

PACKAGE
4 * BETAFPV 0603 16000KV Brushless Motors
Some M1.6x4 screws (Fit for Beta65 Pro and Beta75 Pro frame)

$58.00
$58.00


In Stock: Totally in stock right now

BetaFPV 300mAh High Voltage (HV 4.35) Lipo Battery


The new 300mah packs come in only 0.6 grams heavier than the 260mah packs. More punch and longer flight times by sacrificing a little in weight.

THE IMPORTANT STUFF

Cells: 1S
Voltage: High Voltage (HV) 4.35v at full charge
Connector: JST-PH 2.0 (PowerWhoop)
Rating: 30C constant, 60C peak
Dimension: 11 x 6 x 58mm
Weight: 7.5g
Capacity: 300mAh
ABOUT HIGH VOLTAGE

HV LiPos, otherwise known as LiHV batteries, can be charged to either the standard 4.2 volts or the high voltage 4.35v standard - providing more power and considerably longer flight times.

ABOUT JST-PH 2.0 CONNECTOR

The PowerWhoop connector allows for a more efficient flow of power, resulting in more power and considerably longer flight times.

$7.00
$7.00


In Stock: Totally in stock right now

BetaFPV F3 FC with OSD (FrSky)


BetaFPV FC with F3 chip, embedded OSD and FrSky or DSM Rx (SBUS)
fits Whoop frames with 26x26mm mounting pattern

This flight controller is part of our Whoop kits.
To use the on-screen-display, use the VM2751 cam/vTx.

build instructions:

specifications:
CPU: STM32F303CCT6
sensor unit: MPU6000
ESC: 6.3A rated MOSFETs
dimensions: 26mm x 26mm
OSD: integrated BetaFlight OSD
receiver: Frsky D8 or DSM (SBUS)
power Cable: 55mm, with JST-PH 2.0 connector
weight: 3.4g

binding: press button on FC, then apply power. Now put transmitter into bind mode. Wait a few seconds, exit bind mode on Tx, then power cycle the FC.

The FC comes pre-flashed with BF 3.1.7. I recommend to update your board to the latest stable version BetaFlight 3.2. Here is a video about flashing and configuring BetaFlight:

$49.00
$49.00


In Stock: Totally in stock right now

BetaFPV FC Screws and Damper pack


Those screws and rubber dampers are really useful when you are mounting flight controller board to your Blade Inductrix or Tiny Whoop Quadcopters. M1.2* 4 screws fit for stock Blade Indcutrix frame. M1.4* 5 screws fit for Eachine black E010 frame or Beta75 75mm frame.

PACKAGE
20 * M1.2* 4 screws
20 * M1.4* 5 screws
20 * ruber dampers

$11.50
$11.50


In Stock: Totally in stock right now

BetaFPV Upgraded Beta65 Pro Micro Brushless Whoop Frame


This is the upgraded and latest Brushless Whoop frame from BetaFPV.

Here's a picture showing you the differences between the previous versions:

This is designed for 0603 motors. Whilst you can run the 0703 motors if you really had to... don't do it, its inefficient and bad juju.

$6.00
$6.00


In Stock: Totally in stock right now

BetaFPV Z02 AIO Camera 5.8G VTX


This is the pin connected version. Although realistically, you can easily just cut/de-solder the pins and replace with wires if you wanted. You'll be right. It comes with a white TPU printed mount for the camera and vtx, works nicely.

Z02 AIO camera VTX is the newest video transmitter by BETAFPV. It has 2 great improvement since. First, switchable power output between 0mW, 25mW and 200mW. Second, Smart Audio is included and pilots could control the VTX via your radio transmitter.

FEATURE
Switchable power includes 0mW, 25mW and 200mW.
Smart Audio function is included in this AIO Z02 camera. The flight controller can communicate with the video transmitter using the audio line in. It allows the flight controller to know what frequency the vtx is using, and to change it.
Fixed 20° tilt camera mount. At this angle the pilot can still see everything ahead in full-blown fast forward flight.
Dipole whip high sensitivity antenna

SPECIFICATION
Output power: 0mW, 25mW and 200mW (Adjustable)
Supply Voltage: 2.9-5.5V
Size : 27*17*14 mm
Weight: 4.7g
Antenna: Omnidirectional ANT
Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz
TV System: NTSC
Field of view: 100-120 degrees with 1/4 lens.
HOW TO CHANGE FREQUENCY & CHANNEL & POWER
Frequency group A~F selected still touch up to 2 secs
Channel ch1~ch8 selected with short touch.
Power switch with long touch up to 5 secs.

PACKAGE
1 * BETAFPV Z02 FPV Camera
1 * TPU Holder
2 * Head pins (Using to connect with newest BETAFPV FC boards)

$39.95
$39.95


In Stock: Totally in stock right now

BigdaddyFPV 1500mAh 4s 90c Lipo Battery Pack


Searching for a decent, high-quality li-po battery that won't break the wallet isn't easy in Australia.

Enter the BigdaddyFPV range of lithium polymer batteries.

Featuring G10 protective plates on top and bottom, decent discharge rates and a high build quality, the BigdaddyFPV packs are perfect for those wanting to fly & train every day without abusing your top end race packs.

NOTE: Please do not choose expedited shipping unless you live in greater Sydney as batteries cannot be shipped by Air.

Specifications:

Capacity (mAh): 1500
Voltage (V): 14.8
Discharge Rate (C): 90
Configuration: 4S1P
Net Weight (±20g): 185g
Length (±5mm): 79
Width (±2mm): 34
Height (±2mm): 37
Connector Type: XT, 60
Wire Gauge: AWG12
Wire Length (mm): 95mm
Balance Connector Type: JST, XHR
Balance Connector Length: 50mm

Lipo Battery Safety

Batteries should NEVER be left unattended while charging.
Be absolutely sure that the Lithium Polymer charger settings are correct for the battery pack being charged – both voltage and current settings.
Lithium Polymer must be CHARGED and STORED in a fire-safe container like a Lipo Sack.
Do not charge batteries near flammable items or liquids.
Keep a dry fire extinguisher nearby or a large bucket of dry sand, which is a cheap and effective extinguisher.
Never charge inside an automobile even when parked.
KEEP BATTERIES AWAY from children and pets at ALL times.
Never discharge below 3.5V per cell as it may cause permanent damage and void warranty
Battery may explode if damaged or disposed of in fire
Never leave batteries inside a car on a hot day or any other place where temperature may exceed 140F / 60C.
Although environmentally friendly, lithium polymer cells must be FULLY discharged before disposal. Use a resistor setup (light bulbs, for example) to accomplish this, to avoid the possibility of a short-induced fire after disposal.
Immediately discharge damaged batteries at 1/2 C rate and dispose
Do not put the loose cells in a pocket, bag, or drawer where they could short-circuit against other items, or the battery tabs could be pressed against each other.
Take care that the cells are not punctured, especially by metallic objects like hobby knives.
If the electrolyte in the cells should get on your skin, thoroughly wash with soap and water. If in the eyes, rinse thoroughly with cool water. Immediately seek medical attention for this, or for burns.

$31.95
$31.95


In Stock: Sorry bro, Sold out

Bind Plug


Replacement bind plug.

$2.50
$2.50


In Stock: Totally in stock right now

BK Servo Mini Gear Set for DS-5001HV & DS-7005HV


Includes:

- DS-5001HV and DS-7005HV Servo Gear x 1 set

Use for:

- DS-5001HV and DS-7005HV servos.

$27.90
$27.90


In Stock: Totally in stock right now

BOLT 2206W 2350kv WORX Motor


The BOLT WORX motors come with the same high performance stable as the Kraken WORX. Like all our WORX gear, it is designed from the ground up with our WORX race team to push boundaries and win races. WORX gear blends top performance, extreme light weight yet remain relatively durable for both training and race day.

These motors are designed to deliver a noticeable improvement in handling whilst still maintaining equivalent thrust with the leading power motors.

The motor uses thick N52H magnets and 0.15mm stator lamination that delivers outstanding power and performance. Wound with thick 0.5mm single strand copper, these are not cheap motors, despite the price. The motors uses higher quality ABEC 5 bearings from EZO. These bearings are unique to our WORX brushless motors delivering a more robust and lower profile motor for improved balance when placing the battery below the quad.

This combined with a light weight 25.8 grams (3cm wires) gives this motor an outstanding race pedigree. and most importantly, exceptional handling.

The motor uses a 19mm mount pattern.

Whats the big deal with the weight?

Actually, weight on the end of the arms is more important than any other location on the quad. Our race pilots report noticeable improvements in handling. Any weight here is just magnified by the arm length squared, just google 'moment of inertia'.

How durable are these motors?

Durable enough for both training and race day. We make extensive use of advanced FEA simulation tools to design our motors to maximize strength and yet still reduce weight. That said, nothing in the world is for free.....ie. not to be used for proximity flying.

2 Mount Holes?

Our WORX frames have only two mount holes on the arms.

There are no big fan blades on the cap to keep the motor cool?

Light weight 'fan blades' are hidden under the bell cap together with large exit area at the base make these motors extremely well ventilated.

Can I Run 6S

No, the stator will saturate and you are at risk of blowing the magnets. Its warranted only for 4S although 5S is is just fine, at your risk though.

What is the Thrust

Static thrust is around 1250-1275 grams with DAL 5045 v2s. Note that you can get slightly higher thrust with motors like the ZMX Fusion 2206, however, this comes at the expense of several grams of weight (thicker magnets and also requiring a thicker can). Our extensive race track testing shows that that the small incremental thrust delivers slower times due to poor handling characteristics.

Furthermore, the lighter WORX bell assists the motor accelerate to top speed even quicker.

$18.00
$18.00


In Stock: Totally in stock right now

BOLT Anti-Vibration Motor Mounts


Anti-vibration motor mounts for 2204 to 2208 size motors with 16mm to 19mm mount pattern.

These are made from high quality die cut silicone rubber with a 60 shore.

The mounts have an adhesive option to keep them firmly in place or to double up the thickness as required.

The pack has 10 mounts, enough for 2 quads with spares. Alternatively, stick two together for 2mm thickness.

$5.50
$5.50


In Stock: Totally in stock right now

BoltRC Kraken 3


The Kraken 3 is a ultra light weight and tough quad which leverages on the race wining design features of its big brother. The Kraken frames were created in collaboration with our top team pilots with the goal of producing an ultra competitive race winning performance.

Unlike almost 3in frames, the K3 features true symmetrical X design with superb flight characteristics and outstanding maneuverability. Coupled with our unique molded aerodynamic polycarbonate pod the Kraken 3 delivers a racing pedigree that is hard to match for speed, handling, weight and strength.

Key features include:

unique molded aerodynamic polycarbonate pod
3mm thick carbon fiber arms
not a unibody, it has replaceable arms
not a K frame, true symmetrical X design
fits full size FPV equipment including HS1177 camera

The frame build is quite simple when compared to other 3in frames. This reflects the unique pod design, custom pdb and integrated camera mount. This keeps your FC stack low with ample space for your electronics.

Typical frame weight is 35grams with build weights of approx 250 grams with 1407 motors.

The kit comprises of :
Kraken 3X Arms - 5pcs
Kraken 3 Bottom Plate - 1.5mm CF - 1pc
Kraken 3 PDB - 1.2mm Custom PDB with integrated 8v LDO regulator - 1pc
Kraken Hardware Pack - 1 pack
Kraken PC Pod - 1.0mm - 1pc
Kraken HS1177 Cam Bracket Kit - 1 pack
Kraken Battery Pad
Kraken PDB FC Inset Nuts - 5pcs

More Information:

For information on building your Kraken see link here

$72.00
$72.00


In Stock: Totally in stock right now

BoltRC Kraken 4


The Kraken 4 is an ultra light weight and tough quad which leverages on the race wining design features of its big brother, 5R. The Kraken frames were created in collaboration with our top team pilots with the goal of producing an ultra competitive race winning performance.

Kraken frames feature true symmetrical X design with superb flight characteristics and outstanding maneuverability. Coupled with our unique molded aerodynamic polycarbonate pod the Kraken 4 delivers a racing pedigree that is hard to match for speed, handling, weight and strength.

Key features include:

unique molded aerodynamic polycarbonate pod
4mm thick carbon fiber arms
not a unibody, it has replaceable arms
true symmetrical X design
fits full size FPV equipment including HS1177 camera

The frame build is quite simple when compared to other extreme X frames. This reflects the unique pod design, custom pdb and integrated camera mount. This keeps your FC stack low with ample space for your electronics.

The kit comprises of :
Kraken 4 Arms - 4pcs
Kraken 5 Bottom Plate - 1.5mm CF - 1pc
Kraken 5R PDB - 1.6mm Custom PDB with integrated 8v LDO regulator - 1pc
Kraken Hardware Pack - 1 pack
Kraken PC Pod - 1.5mm - 1pc
Kraken HS1177 Cam Bracket Kit - 1 pack
Kraken Battery Pad
Kraken PDB FC Inset Nuts - 5pcs

More Information:

For information on building your Kraken see link here

$85.00
$85.00


In Stock: Totally in stock right now

BoltRC Kraken 5 WORX


Note: This is the international version that ships with 2 pods but no LDO reg.

The K5W is an extreme light weight quad featuring aerodynamic performance. Despite weighing only 50 grams, the frame will survive a surprising number of tumbles. This is frame used by many of the worlds top pilots including rekrek, ghost, mad air, Julien FPV, waffle, jeddy, banni and many more!

Kraken frames feature true symmetrical X design with superb flight characteristics and outstanding maneuverability. Coupled with our unique molded aerodynamic polycarbonate pod the Kraken delivers a racing pedigree that is hard to match for speed, handling, weight and strength.

Key features include:

- unique molded aerodynamic polycarbonate pod
- 4mm thick carbon fiber arms
- not a unibody, it has replaceable arms
- true symmetrical X design
- fits full size FPV equipment including HS1177 camera

The frame build is quite simple when compared to other extreme X frames. This reflects the unique pod design, custom pdb and integrated camera mount. This keeps your FC stack low with ample space for your electronics.

The kit comprises of :

Kraken 5W Arms - 5pcs
Kraken 5 WORX Bottom Plate - 1.5mm CF - 1pc
Kraken 5 WORX PDB - 1.2mm Custom PDB with integrated 8v LDO regulator - 1pc
Kraken Hardware Pack - 1 pack
Kraken PC Pod - 1.0mm - 1pc
Kraken PC Pod - 1.5mm - 1pc
Kraken HS1177 Cam Bracket Kit - 1 pack
Kraken Battery Pad
Kraken PDB FC Inset Nuts - 5pcs

Warning - This is an extreme frame which requires occasional repairs due to higher breakage rate. Not recommended for beginners or proximity flying.

More Information:

For information on building your Kraken see link

$89.00
$89.00


In Stock: Totally in stock right now

BoltRC Kraken 5X


The Kraken 5 is an ultra light weight and tough quad which is designed and made to win races. The Kraken frames were created in collaboration with our top team pilots with the goal of producing an ultra competitive race winning performance.

Kraken frames feature true symmetrical X design with superb flight characteristics and outstanding maneuverability. Coupled with our unique molded aerodynamic polycarbonate pod the Kraken 4 delivers a racing pedigree that is hard to match for speed, handling, weight and strength.

Key features include:

unique molded aerodynamic polycarbonate pod
4mm thick carbon fiber arms
not a unibody, it has replaceable arms
true symmetrical X design
fits full size FPV equipment including HS1177 camera

The frame build is quite simple when compared to other extreme X frames. This reflects the unique pod design, custom pdb and integrated camera mount. This keeps your FC stack low with ample space for your electronics.

The kit comprises of :

Kraken 5X Arms - 4pcs
Kraken 5 Bottom Plate - 1.5mm CF - 1pc
Kraken 5X PDB - 2.0mm Custom PDB with integrated 8v LDO regulator - 1pc
Kraken Hardware Pack - 1 pack
Kraken PC Pod - 3.0mm - 1pc
Kraken HS1177 Cam Bracket Kit - 1 pack
Kraken Battery Pad
Kraken PDB FC Inset Nuts - 5pcs

The K5R is built lighter whereas the K5X is built tougher:

K5R has a 1.6mm PDB whereas K5X has a stronger stiffer 2.0mm PDB
K5R arms are 12mm wide at narrowest point whereas K5X is 14mm
K5R uses the 2.0mm pod whereas the K5X uses the 3.0mm pod.
More Information:

For information on building your Kraken see link here.

$89.00
$89.00


In Stock: Sorry bro, Sold out

BoltRC Lambda 5


This is the all new BoltRC Lambda 5 inch racing frame.

The frame is a semi stetch sitting half way between a symmetrical and full stretch. Also, the front and rear arms do not meet in the centre. Why you ask? You get most of the stretch flight benefits but none of the strength disadvantages. Essentially the arms are the same length as a regular symmetrical frame arm

Weight is approx 70g (TBC)

5mm thick custom foam sandwich arms.
Hybrid motor mount system for great strength on front arms
Fits mini cams with 4 point adj mount
Lens Check (cam bracket slides forward and aft by 3mm)
Thick 2mm top plate for strength
1mm integrated top front bumper
30mm 7045 standoffs
Rear 7075 multi purpose standoff
Integrated XT60 clamp
Integrated VTX antenna mount - regular
Compatible with unify and tramp antenna mount
Integrated 30.5 and 20x20 FC stack systemThe kit comprises of :

Front Arms - 2pcs
Rear Arms - 2pcs
Lower Bottom Plate - 2mm CF - 1pc
Upper Bottom Plate - 1.5mm CF - 1pc
Top Plate - 2mm - 1pc
Top Front Bumper - 1mm - 1pc
Bottom Front Bumper - 5mm - 1pc
Bottom Rear Bumper - 5mm - 1pc
7075 Front Standoff - 3pcs
7075 Rear Standoff - 3pcs
Hardware Pack - 1 pack
Cam Brackets (L+R) - 1 each
Battery Pad

$80.00
$80.00


In Stock: Totally in stock right now

BRIX Race 5 Inch - Pod X Frame


The BRIX Race is the perfect companion for your BRIX Trainer (available here). The BRIX Race is faster, lighter, more streamlined and cooler than the trainer version. Practice on the BRIX Trainer, and pull out the BRIX Race on race day.

The BRIX Race is built for 5" props and weighs less than 85 grams including fasteners. The arms are made out of the highest grade full twill 4mm carbon fibre and feature a near unbreakable polyurethane pod resulting in an incredibly tough 5 inch X frame.

Each frame includes a red 55 degree TPU pod, 2x battery straps, a fastener kit, bottom plate, top plate and a custom PDB designed with the FMR Kakute in mind.

The pod is designed for HS1177 form factor cameras and the AU799T VTX or similar.

$77.00
$77.00


In Stock: Totally in stock right now