Product Search

BetaFPV Z02 AIO Camera 5.8G VTX


This is the pin connected version. Although realistically, you can easily just cut/de-solder the pins and replace with wires if you wanted. You'll be right. It comes with a white TPU printed mount for the camera and vtx, works nicely.

Z02 AIO camera VTX is the newest video transmitter by BETAFPV. It has 2 great improvement since. First, switchable power output between 0mW, 25mW and 200mW. Second, Smart Audio is included and pilots could control the VTX via your radio transmitter.

FEATURE
Switchable power includes 0mW, 25mW and 200mW.
Smart Audio function is included in this AIO Z02 camera. The flight controller can communicate with the video transmitter using the audio line in. It allows the flight controller to know what frequency the vtx is using, and to change it.
Fixed 20° tilt camera mount. At this angle the pilot can still see everything ahead in full-blown fast forward flight.
Dipole whip high sensitivity antenna

SPECIFICATION
Output power: 0mW, 25mW and 200mW (Adjustable)
Supply Voltage: 2.9-5.5V
Size : 27*17*14 mm
Weight: 4.7g
Antenna: Omnidirectional ANT
Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz
TV System: NTSC
Field of view: 100-120 degrees with 1/4 lens.
HOW TO CHANGE FREQUENCY & CHANNEL & POWER
Frequency group A~F selected still touch up to 2 secs
Channel ch1~ch8 selected with short touch.
Power switch with long touch up to 5 secs.

PACKAGE
1 * BETAFPV Z02 FPV Camera
1 * TPU Holder
2 * Head pins (Using to connect with newest BETAFPV FC boards)

$39.95
$39.95


In Stock: Totally in stock right now

Bind Plug


Replacement bind plug.

$2.50
$2.50


In Stock: Totally in stock right now

BK Servo Mini Gear Set for DS-5001HV & DS-7005HV


Includes:

- DS-5001HV and DS-7005HV Servo Gear x 1 set

Use for:

- DS-5001HV and DS-7005HV servos.

$27.90
$27.90


In Stock: Totally in stock right now

BOLT 2206W 2350kv WORX Motor


The BOLT WORX motors come with the same high performance stable as the Kraken WORX. Like all our WORX gear, it is designed from the ground up with our WORX race team to push boundaries and win races. WORX gear blends top performance, extreme light weight yet remain relatively durable for both training and race day.

These motors are designed to deliver a noticeable improvement in handling whilst still maintaining equivalent thrust with the leading power motors.

The motor uses thick N52H magnets and 0.15mm stator lamination that delivers outstanding power and performance. Wound with thick 0.5mm single strand copper, these are not cheap motors, despite the price. The motors uses higher quality ABEC 5 bearings from EZO. These bearings are unique to our WORX brushless motors delivering a more robust and lower profile motor for improved balance when placing the battery below the quad.

This combined with a light weight 25.8 grams (3cm wires) gives this motor an outstanding race pedigree. and most importantly, exceptional handling.

The motor uses a 19mm mount pattern.

Whats the big deal with the weight?

Actually, weight on the end of the arms is more important than any other location on the quad. Our race pilots report noticeable improvements in handling. Any weight here is just magnified by the arm length squared, just google 'moment of inertia'.

How durable are these motors?

Durable enough for both training and race day. We make extensive use of advanced FEA simulation tools to design our motors to maximize strength and yet still reduce weight. That said, nothing in the world is for free.....ie. not to be used for proximity flying.

2 Mount Holes?

Our WORX frames have only two mount holes on the arms.

There are no big fan blades on the cap to keep the motor cool?

Light weight 'fan blades' are hidden under the bell cap together with large exit area at the base make these motors extremely well ventilated.

Can I Run 6S

No, the stator will saturate and you are at risk of blowing the magnets. Its warranted only for 4S although 5S is is just fine, at your risk though.

What is the Thrust

Static thrust is around 1250-1275 grams with DAL 5045 v2s. Note that you can get slightly higher thrust with motors like the ZMX Fusion 2206, however, this comes at the expense of several grams of weight (thicker magnets and also requiring a thicker can). Our extensive race track testing shows that that the small incremental thrust delivers slower times due to poor handling characteristics.

Furthermore, the lighter WORX bell assists the motor accelerate to top speed even quicker.

$18.00
$18.00


In Stock: Totally in stock right now

BOLT Anti-Vibration Motor Mounts


Anti-vibration motor mounts for 2204 to 2208 size motors with 16mm to 19mm mount pattern.

These are made from high quality die cut silicone rubber with a 60 shore.

The mounts have an adhesive option to keep them firmly in place or to double up the thickness as required.

The pack has 10 mounts, enough for 2 quads with spares. Alternatively, stick two together for 2mm thickness.

$5.50
$5.50


In Stock: Totally in stock right now

BoltRC Kraken 3


The Kraken 3 is a ultra light weight and tough quad which leverages on the race wining design features of its big brother. The Kraken frames were created in collaboration with our top team pilots with the goal of producing an ultra competitive race winning performance.

Unlike almost 3in frames, the K3 features true symmetrical X design with superb flight characteristics and outstanding maneuverability. Coupled with our unique molded aerodynamic polycarbonate pod the Kraken 3 delivers a racing pedigree that is hard to match for speed, handling, weight and strength.

Key features include:

unique molded aerodynamic polycarbonate pod
3mm thick carbon fiber arms
not a unibody, it has replaceable arms
not a K frame, true symmetrical X design
fits full size FPV equipment including HS1177 camera

The frame build is quite simple when compared to other 3in frames. This reflects the unique pod design, custom pdb and integrated camera mount. This keeps your FC stack low with ample space for your electronics.

Typical frame weight is 35grams with build weights of approx 250 grams with 1407 motors.

The kit comprises of :
Kraken 3X Arms - 5pcs
Kraken 3 Bottom Plate - 1.5mm CF - 1pc
Kraken 3 PDB - 1.2mm Custom PDB with integrated 8v LDO regulator - 1pc
Kraken Hardware Pack - 1 pack
Kraken PC Pod - 1.0mm - 1pc
Kraken HS1177 Cam Bracket Kit - 1 pack
Kraken Battery Pad
Kraken PDB FC Inset Nuts - 5pcs

More Information:

For information on building your Kraken see link here

$72.00
$72.00


In Stock: Sorry bro, Sold out

BoltRC Kraken 4


The Kraken 4 is an ultra light weight and tough quad which leverages on the race wining design features of its big brother, 5R. The Kraken frames were created in collaboration with our top team pilots with the goal of producing an ultra competitive race winning performance.

Kraken frames feature true symmetrical X design with superb flight characteristics and outstanding maneuverability. Coupled with our unique molded aerodynamic polycarbonate pod the Kraken 4 delivers a racing pedigree that is hard to match for speed, handling, weight and strength.

Key features include:

unique molded aerodynamic polycarbonate pod
4mm thick carbon fiber arms
not a unibody, it has replaceable arms
true symmetrical X design
fits full size FPV equipment including HS1177 camera

The frame build is quite simple when compared to other extreme X frames. This reflects the unique pod design, custom pdb and integrated camera mount. This keeps your FC stack low with ample space for your electronics.

The kit comprises of :
Kraken 4 Arms - 4pcs
Kraken 5 Bottom Plate - 1.5mm CF - 1pc
Kraken 5R PDB - 1.6mm Custom PDB with integrated 8v LDO regulator - 1pc
Kraken Hardware Pack - 1 pack
Kraken PC Pod - 1.5mm - 1pc
Kraken HS1177 Cam Bracket Kit - 1 pack
Kraken Battery Pad
Kraken PDB FC Inset Nuts - 5pcs

More Information:

For information on building your Kraken see link here

$85.00
$85.00


In Stock: Sorry bro, Sold out

BoltRC Kraken 5 WORX


Note: This is the international version that ships with 2 pods but no LDO reg.

The K5W is an extreme light weight quad featuring aerodynamic performance. Despite weighing only 50 grams, the frame will survive a surprising number of tumbles. This is frame used by many of the worlds top pilots including rekrek, ghost, mad air, Julien FPV, waffle, jeddy, banni and many more!

Kraken frames feature true symmetrical X design with superb flight characteristics and outstanding maneuverability. Coupled with our unique molded aerodynamic polycarbonate pod the Kraken delivers a racing pedigree that is hard to match for speed, handling, weight and strength.

Key features include:

- unique molded aerodynamic polycarbonate pod
- 4mm thick carbon fiber arms
- not a unibody, it has replaceable arms
- true symmetrical X design
- fits full size FPV equipment including HS1177 camera

The frame build is quite simple when compared to other extreme X frames. This reflects the unique pod design, custom pdb and integrated camera mount. This keeps your FC stack low with ample space for your electronics.

The kit comprises of :

Kraken 5W Arms - 5pcs
Kraken 5 WORX Bottom Plate - 1.5mm CF - 1pc
Kraken 5 WORX PDB - 1.2mm Custom PDB with integrated 8v LDO regulator - 1pc
Kraken Hardware Pack - 1 pack
Kraken PC Pod - 1.0mm - 1pc
Kraken PC Pod - 1.5mm - 1pc
Kraken HS1177 Cam Bracket Kit - 1 pack
Kraken Battery Pad
Kraken PDB FC Inset Nuts - 5pcs

Warning - This is an extreme frame which requires occasional repairs due to higher breakage rate. Not recommended for beginners or proximity flying.

More Information:

For information on building your Kraken see link

$89.00
$89.00


In Stock: Totally in stock right now

BoltRC Kraken 5X


The Kraken 5 is an ultra light weight and tough quad which is designed and made to win races. The Kraken frames were created in collaboration with our top team pilots with the goal of producing an ultra competitive race winning performance.

Kraken frames feature true symmetrical X design with superb flight characteristics and outstanding maneuverability. Coupled with our unique molded aerodynamic polycarbonate pod the Kraken 4 delivers a racing pedigree that is hard to match for speed, handling, weight and strength.

Key features include:

unique molded aerodynamic polycarbonate pod
4mm thick carbon fiber arms
not a unibody, it has replaceable arms
true symmetrical X design
fits full size FPV equipment including HS1177 camera

The frame build is quite simple when compared to other extreme X frames. This reflects the unique pod design, custom pdb and integrated camera mount. This keeps your FC stack low with ample space for your electronics.

The kit comprises of :

Kraken 5X Arms - 4pcs
Kraken 5 Bottom Plate - 1.5mm CF - 1pc
Kraken 5X PDB - 2.0mm Custom PDB with integrated 8v LDO regulator - 1pc
Kraken Hardware Pack - 1 pack
Kraken PC Pod - 3.0mm - 1pc
Kraken HS1177 Cam Bracket Kit - 1 pack
Kraken Battery Pad
Kraken PDB FC Inset Nuts - 5pcs

The K5R is built lighter whereas the K5X is built tougher:

K5R has a 1.6mm PDB whereas K5X has a stronger stiffer 2.0mm PDB
K5R arms are 12mm wide at narrowest point whereas K5X is 14mm
K5R uses the 2.0mm pod whereas the K5X uses the 3.0mm pod.
More Information:

For information on building your Kraken see link here.

$89.00
$89.00


In Stock: Totally in stock right now

BoltRC Lambda 5


This is the all new BoltRC Lambda 5 inch racing frame.

The frame is a semi stetch sitting half way between a symmetrical and full stretch. Also, the front and rear arms do not meet in the centre. Why you ask? You get most of the stretch flight benefits but none of the strength disadvantages. Essentially the arms are the same length as a regular symmetrical frame arm

Weight is approx 70g (TBC)

5mm thick custom foam sandwich arms.
Hybrid motor mount system for great strength on front arms
Fits mini cams with 4 point adj mount
Lens Check (cam bracket slides forward and aft by 3mm)
Thick 2mm top plate for strength
1mm integrated top front bumper
30mm 7045 standoffs
Rear 7075 multi purpose standoff
Integrated XT60 clamp
Integrated VTX antenna mount - regular
Compatible with unify and tramp antenna mount
Integrated 30.5 and 20x20 FC stack systemThe kit comprises of :

Front Arms - 2pcs
Rear Arms - 2pcs
Lower Bottom Plate - 2mm CF - 1pc
Upper Bottom Plate - 1.5mm CF - 1pc
Top Plate - 2mm - 1pc
Top Front Bumper - 1mm - 1pc
Bottom Front Bumper - 5mm - 1pc
Bottom Rear Bumper - 5mm - 1pc
7075 Front Standoff - 3pcs
7075 Rear Standoff - 3pcs
Hardware Pack - 1 pack
Cam Brackets (L+R) - 1 each
Battery Pad

$60.00
$60.00


In Stock: Totally in stock right now

Botgrinder Mixing Tray


This tray is just as at home on the bench as it is in the field, use it to keep track of all those screws during a new build or use it with the magnetic lid to transport your favorite flying enhancers to the bando! With original art by miss.creature this botgrinder tray is the perfect addition to any pilots arsenal.

-BOTGRINDER

$25.00
$25.00


In Stock: Totally in stock right now

BrainFPV Radix Flight Controller


BrainFPV Radix, the smartest, most innovative line of drone electronics BrainFPV has ever developed.
BrainFPV brings us their latest creation, the Radix Flight Controller. With a speedy F4 processor, full graphics capable OSD, and stackable form factor, this FC has all the essentials but with many things, it's the details that count. There are so many, you'd be better off looking at the specs yourself.
Features

Best setup manual ever made
Improved form factor for easier soldering of PDB / 4-in-1 ESC underneath RADIX FC
Plug-and-play stacking on RADIX PB or Hobbywing 4-in-1 ESC using soft cables for vibration isolation
Graphical OSD - the only flight controller running BF with this feature
Customisable OSD logos using the BrainFPV Logo Customiser
STM32 F4 processor running at 180MHz
Better sensors - Bosch BMI160 gyro, proven on RE1 (pilots are raving about it)
Integrated barometer - so you always know how high you are
MicroSD card slot for logging
Integrated silicone grommets for vibration isolation
Dedicated camera control pad for changing camera settings
Dedicated RGB LED output for programmable LEDs
Four full hardware serial ports (UARTs) - two of them have signal inverters that are automatically enabled or disabled, so they can be used with S.Bus or SmartPort
6 motor outputs with support for DHSOT (150/300/600/1200) and OneShot
Supports Betaflight
Engineered and tested in the USA

Specifications

Processor: STM32F446RET6, Coretx-M4, 32bit, 180MHz, 128kB RAM, 512kB Flash.
IMU: Bosch Sensortec BMI160 running at 3.2kHz, connected using SPI.
Baro: Bosch Sensortec BMP280 connected using SPI.
OSD: Full-graphic, PAL/NTSC auto detect, adjustable black and white levels. Full Betaflight OSD support with extra graphical features.
BEC: 5V, 2A with Radix PDB
Memory: MicroSD card slot for logging.
Motor Outputs: 6 outputs with full DSHOT (150/300/600/1200) and OneShot support.
Receiver Support: PPM, S.Bus (inverter built-in), DSM, HoTT, SRXL, CSRF, F.Port ready. 5V or 3.3V supply for a receiver.
Telemetry Support: FrSKY Smart Port, FrSKY Sensor Hub, HoTT Telemetry, SRXL, CSRF, F.Port ready. Built-in inverter for FrSKY telemetry.
Serial Ports: 4 full serial ports (UARTs). UART3 and UART6 have inverters for S.Bus and SmartPort telemetry.
RGB LEDs: Dedicated RGB LED output.
Camera Control: Dedicated output for accessing the camera menu to change camera settings.
IR Emitter: Dedicated output for infrared-based lap timing with multi-protocol support (I-Lap, Trackmate). Needs external IR LED and driver.
Buzzer Port: Dedicated port for 5V (100mA max) buzzers.
Analog Inputs: Voltage sensing up to 35V, current and RSSI inputs (3.3V max).
Power: 4.5V to 5.5V, 120mA.
Dimensions: 37mm x 37mm, 30.5mm hole spacing. 4.1mm holes for anti-vibration grommets.
Weight: 6g

Includes
1x Radix flight controller
4xSilicone anti-vibration grommets

$89.95
$89.95


In Stock: Totally in stock right now

BrainFPV Radix LI Flight Controller


Graphics OSD

On top of the normal Betaflight OSD, RADIX LI on-screen-display gives you extra features you can't get anywhere else. Proudly show off your pilot and team logo using our logo customizer with just a click of a button. Extra features also include a graphical barometer scale, artificial horizon, gyro spectrograph, RC stick display, 3D OSD support and more!
Compared to the RADIX, the RADIX LI:

Is smaller (doh): 20mm hole spacing, 26.5mm x 26.5mm outside dimensions
Can be powered directly from a 3S - 6S LiPo battery (500mA BEC built-in)
Does not have a barometer (you can attach a GPS to it if you want to know how high you are)
Does not have a MicroSD card slot (who need blackbox if you can OSD spectrograph for tuning?)
Does not have an analog RSSI input (these days, using RSSI or LQ over an RC channel is more common and more accurate)
Finally: The RADIX LI is cuter

FC Specification

Processor: STM32F446RET6, Coretx-M4, 32bit, 180MHz, 128kB RAM, 512kB Flash.
IMU: Bosch Sensortec BMI160 running at 3.2kHz, connected using SPI.
OSD: Full-graphic, PAL/NTSC auto detect, adjustable black and white levels. Full Betaflight OSD support with extra graphical features. Support for side-by-side 3D when used with a 3D FPV camera.
Motor Outputs: 6 outputs with full DSHOT (150/300/600/1200) and OneShot support.
Receiver Support: PPM, S.Bus (inverter built-in), DSM, HoTT, SRXL, CSRF, FPort ready. 5V or 3.3V supply for receiver. Receiver is powered from USB for easy and safe setup.
Telemetry Support: FrSKY Smart Port, FrSKY Sensor Hub, HoTT Telemetry, SRXL, CSRF, FPort ready. Built-in inverter for FrSKY telemetry.
Serial Ports: 4 full serial ports (UARTs). UART3 and UART6 have inverters for S.Bus and SmartPort telemetry. Inverters are automatically enabled/disabled for maximum flexibility.
RGB LEDs: Dedicated RGB LED output.
Camera Control: Dedicated output for accessing the camera menu to change camera settings.
Buzzer Port: Dedicated port for 5V (100mA max) buzzers.
Analog Inputs: Voltage sensing (VBAT), current input (3.3V max).
Power: 3S - 6S (7.5V - 26V), 500mA BEC
Dimensions: 26.5mm x 26.5mm, 20mm hole spacing. 4.1mm holes for anti-vibration grommets for M3 screws.
Weight: 4g
Gluten free, Non GMO, Free Range Anorganic Gyro

RADIX LI Includes

RADIX LI flight controller
Silicone anti-vibration grommets 4x
BrainFPV 4-in-1 ESC cable kit (cables and connectors to make a cable that works with any 4-in-1 ESC with a JST-SH 7 pin, 8 pin, or 10 pin connector)

$84.90
$84.90


In Stock: Totally in stock right now

Bullet Connectors 6mm Gold


6mm Sprung Gold Connectors. Nice and beefy.

Good to around 160A

Includes 1 pair.

$1.20
$1.20


In Stock: Sorry bro, Sold out

Bullet Connectors 8mm Gold


8mm Gold Connectors
Rated to around 170A
Excellent for high current systems.
Includes 1 pair
Weight: 11g (per pair)

$2.50
$2.50


In Stock: Totally in stock right now

Byron Originals Lube Booster


This is a 10 ounce bottle of Byron Originals Lube Booster. Lube Booster was designed as a response to requests from modelers currently running non-Byron fuel of questionable oil content and oil quality. Lube Booster can be added in an effort to "upgrade" the "Brand X" fuel in some cases where a higher oil content may be desired for break-in of certain engines. Lube Booster also allows the modeler to mix his own break-in fuel in the quantity and nitro content he or she wants.

$15.00
$15.00


In Stock: Totally in stock right now

CL-0615-17 Red Edition Coreless Motor (speed: faster) 4 Pack


A great all-round motor for serious whooping, with good power and good efficiency!

Warning: do not use this motor with the Nano QX (non FPV), Nano QX FPV or Inductrix (non FPV) FCs. The motors are too fast for these FCs and will cause throttle and oscillation issues.

Its OK to use the 0615-17 motors with the Inductrix FPV FC.

17.000Kv: very fast, a noticeable boost over the -14 motors, but not as power-hungry as the -19s

performance data:

speed: 17.000Kv
operating voltage: 1.5-3.7V
1.5A load current at 3.7V (direct drive)
lifetime rating: 5-6 hours
dimensions:

can diameter: 6mm
can length: 15mm
shaft diameter: 0.8mm
shaft length: 5mm
weight: 1.8g
wire length: 70mm
plug: Micro-JST-1.25
To maximize performance and life span, don't run them in reverse!

Motor rotation and correct polarity is indicated by the wire color:
clockwise: red +, blue -
counter clockwise: white +, black -

Please note: wire color coding is reversed from the stock motors. (Blade has decided to code their motors differently to everyone else in the industry..) Please click here for installation instructions! (Inductrix and Nano QX have the same motor positions)

$25.00
$25.00


In Stock: Sorry bro, Sold out

CL-0615-19 Coreless Motor (speed: insane) 4 Pack


Warning: do not use this motor with the Nano QX (non FPV), Nano QX FPV or Inductrix (non FPV) FCs. The motors are too fast for these FCs and will cause throttle and oscillation issues.
Its OK to use the 0615-17 motors with the Inductrix FPV FC.

You need a LOT of power to run these motors at the limit. Please look at this part collection for batteries and connectors. Weak batteries and connectors will lead to short flight time and poor performance.

performance data:

speed: 19.000Kv
operating voltage: 1.5-3.7V
2.0A load current at 3.7V (direct drive)
lifetime rating: 3-6 hours
dimensions:

can diameter: 6mm
can length: 15mm
shaft diameter: 0.8mm
shaft length: 5mm
weight: 1.8g
wire length: 70mm
plug: Micro-JST-1.25
To maximize performance and life span, don't run them in reverse!

Motor rotation and correct polarity is indicated by the wire color:
clockwise: red +, blue -
counter clockwise: white +, black -

Please note: wire color coding is reversed from the stock motors. (Blade has decided to code their motors differently to everyone else in the industry..) Please click here for installation instructions! (Inductrix and Nano QX have the same motor positions)

$25.00
$25.00


In Stock: Sorry bro, Sold out

CL-0617-25 Coreless Motor (speed: ludicrous) 4 Pack


The craziest motors around, not for everyone and certainly not for the feint hearted. As these are longer motors, you need to be running the cockroach frame and you need to trim the little bit of plastic at the bottom of each motor housing to fit them.

specifications:

speed: 25.000Kv
operating voltage: 1.5-3.7V
current draw under full load: 3.5A
dimensions:

can diameter: 6mm
can length: 17mm
shaft diameter: 0.8mm
shaft length: 5mm
weight: 1.9g
wire length: 7cm
plugs: Micro-JST 1.25

$20.00
$20.00


In Stock: Totally in stock right now

CL-0716-17 Coreless Motor (speed: insane) 4 Pack


specifications:

speed: 17.000Kv
operating voltage: 1.5-3.7V
lifetime rating: 5-6 hours

dimensions:

can diameter: 7mm
can length: 16mm
shaft diameter: 0.8mm
shaft length: 5mm
weight: 2.9g
wire length: 8cm
plugs: Micro-JST 1.25

$33.00
$33.00


In Stock: Sorry bro, Sold out

CLRacing F7 MPU 6000 V2.1 Flight Controller


Features

MCU: STM32F722RET6216MHz
6-Axis MPU6000 Separated Interrupts
Build in Beta flight OSD
Up to 8S(36V) direct battery power
Build in Voltage monitoring resistor
Build in 5V/3A BEC and 3.3V/250mA for system
Led strip share 5V with 5V/3.0A BEC
5V OR VBAT, camera and VTX POWER VIA Pit Switch
6 Full UARTS: UART1, UART2, UART3, UART4, UART5, UART6
Buildin Camera Control pin with necessary resistor and capacitor near camera connection
Buzzerpads for external buzzer
Build in 32MB Blackbox flash chip
M4 Can be selected either led strip signal or M4 signal for RPM filtering

Includes

1x CLRacing F7 V2 MPU6000 30×30 Flight Controller
6x Soft Mount Gummies
1x 4in1 Cable
2x Spare Plug

$58.95
$58.95


In Stock: Totally in stock right now

CLRacing F7 V2.1 MPU6000 ESC & Flight Controller Combo


A great value ESC and FC Combo!

Main FC Features
1. MCU: STM32F722RET6 216MHz
2. MPU6000 Single Gyro
3. Build in Beta flight OSD
4. Up to 8S(36V) direct battery power
5. Build in Voltage monitoring resistor
6. Build in 5V/3A BEC and 3.3V/250mA for system
7. Led strip share 5V with 5V/3.0A BEC
8. 5V OR VBAT, camera and VTX POWER VIA Pit Switch
9. 6 Full UARTS: UART1, UART2, UART3, UART4, UART5, UART6
10. Build in Camera Control pin with necessary resistor and capacitor near camera connection
11. Buzzer pads for external buzzer
12. VBAT Polarity protection
13. Build in 32MB Blackbox flash chip
14. M4 Can be selected either led strip signal or M4 signal for RPM filtering

Main ESC Features
LIPO: 2-6S LIPO
Weight:13.5g
Firmware: Blheli_32
Size : 43.5mm x 46.5mm
Mounting : 30.5mm x 30.5mm / ID 4mm
Con.Current:45A, Peak 55A @10s
Support: Dshot300-1200/MultiShot/OneShot/ProShot/PMW
Connection: PNP with CLRACING F7 FC, with JST1.0 8 pin connector or soldering pads
Current scale: 250
Accessory:
10 x M3*5mm nylon thread through spacers
5 x M3*25mm nylon screws
5 x M3 nylon nuts
5 x Yellow Grummits
2 x 14 AWG 80mm Silicone wires
1 x connection cable
1 x Amass XT60
1 x Rubycon 1000uf 35v ZLH capacitor

$119.95
$119.95


In Stock: Sorry bro, Sold out

Cobra CM2204-28 KV1960 Brushless Motor


Cobra Brushless Multirotor Motors offer performance and value for Your RC Models. They are built from high quality components, and are designed to give years of top-level performance. All Cobra Motors are shipped in a custom designed package that features protective foam on all sides, with separate compartments to protect the motor and accessory pack.

The Cobra CM-2204 series motors have a 3.0mm motor shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life. The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Since these motors are typically soldered directly to the speed controller to save weight, the 2204 motors come without bullet connectors and feature extended pre-tinned motor leads that are 4-1/2 inches (110mm) long. These motors also have 3mm threaded holes in a 16x19mm pattern on the back plate for easy installation on your model.

The newest version of the CM-2204 series motors feature an integrated 5mm threaded motor shaft which eliminates the chance of having a prop adapter spin off in flight. The included prop washer and nylon insert prop nut provides a solid attachment for your propellers that will not loosen up and slip during use.

Included with every Cobra CM-2204 Series Motor is a complete accessory package which contains the following items:
● Four M3x5mm Motor Mount Screws
● Four M3 Flat Washers
● Machined Aluminum Prop Washer
● Locking Prop Nut with Nylon Insert

Specifications:

Stator Diameter 22.0 mm (0.866 in)
Stator Thickness 4.0 mm (0.157 in)
Number of Stator Slots 12
Number of Magnet Poles 14
Motor Wind 32 Turn Delta
Motor Kv Value 1960 RPM per Volt
No Load Current (Io) 0.58 Amps @ 8 Volts
Motor Resistance (Rm) per Phase 0.153 Ohms
Motor Resistance (Rm) Phase to Phase 0.102 Ohms
Maximum Continuous Current 13 Amps
Max Continuous Power (2-cell Li-Po) 90 Watts
Max Continuous Power (3-cell Li-Po) 140 Watts
Motor Weight 24.6 grams (0.87 oz.)
Outside Diameter 27.0 mm (1.063 in.)
Shaft Diameter 3.00 mm (0.118 in.)
Motor Body Length 14.2 mm (0.559 in.)
Overall Shaft Length 32.5 mm (1.145 in.)
Motor Timing 5-10 degrees
PWM Frequency 8 KHz

$10.00
$10.00


In Stock: Totally in stock right now

CR1225 Button Cell Battery for Night Blades


CR1225 Button Cell Battery for Night Blades

$4.50
$4.50


In Stock: Totally in stock right now

CR1632 Button Cell Battery for Night Blades


CR1632 Button Cell Battery for Night Blades

$6.00
$6.00


In Stock: Totally in stock right now

D-Sun 3A Switching Power Regulator


This is a small switching power supply rated for up to 3A. We recommend keeping it under 1.8A without reasonable cooling. It has an adjustable voltage level so will handle the usual 3.3v, 5v, 6v, 12v etc required to power your flight controller, receiver, camera and VTX.

This is ideal for mini fpv rotors running 4S and opto ESCs.

Specifications:
Input voltage: 4.5-28V
Output Voltage: 0.8-20V (adjustable)
Output current: rated current 3A(MAX).
Switching Frequency: 1MHz
Output Ripple: 30mV (with cap)
Efficiency:96%(max)
Operating temperature: Industrial grade (-40 C to +85 C)
Module Properties: Non-isolated step-down module (buck)
Size:22*17*4mm

$2.75
$2.75


In Stock: Totally in stock right now

D-sun Mini Switching Power Regulator


Pretty much the same as the 3A version but its a bit smaller. Great for keeping your VTX power regulated, or powering your camera, or maybe some LED's... whatever you want man!

Specifications

Module Properties: Non-isolated step-down module (BUCK)
Rectification: Synchronous rectification
Input voltage: DC 4.75V-23V
Output voltage: DC 1.0V-17V (Adjustable, Output < Input)
Output current: Rated current 1.8A (3A MAX, can not be prolonged)
Output ripple: 30mV (no-load)
Dimension: 17 x 11 x 4mm (L x W x H) / 0.67 x 0.43 x 0.16 inch approx

$2.25
$2.25


In Stock: Totally in stock right now

DALPROP Cyclone T5046C Cyclone 5" 3 Blade Props (20pcs) - Crystal Purple


Dalprop high-end CYCLONE series, features faster reaction, easier cornering and less noise, excellent aerodynamics design make them ideal for drone racing. 5mm inner diameter, more durable and gives you a better chance of staying in the air after hitting that ghost branch.

Available in packs of 20pcs (10CW & 10CCW / 5 sets of 4)

$12.00
$12.00


In Stock: Sorry bro, Sold out

DALPROP Cyclone T5046C Cyclone 5" 3 Blade Props (20pcs) - Crystal Red


Dalprop high-end CYCLONE series, features faster reaction, easier cornering and less noise, excellent aerodynamics design make them ideal for drone racing. 5mm inner diameter, more durable and gives you a better chance of staying in the air after hitting that ghost branch.

Available in packs of 20pcs (10CW & 10CCW / 5 sets of 4)

$12.00
$12.00


In Stock: Sorry bro, Sold out

DALPROP Cyclone T5047C Cyclone 5" 3 Blade Props (12pcs) - Crystal Blue


Dalprop's newly released CYCLONE T5047C propeller has a new aerodynamic design, increasing acceleration and overall speed. This cutting edge design also makes the DAL 5047C significantly smoother than previous designs which makes it feel much more locked in on turns.

German Bayer PC material is made of a high quality, flexible and durable plastic that is very tough and can easily survive crashes.

Compatible with POPO systems.

Includes 3 full sets:
6x CW props
6x CCW props

$7.95
$7.95


In Stock: Totally in stock right now

DALPROP Cyclone T5047C Cyclone 5" 3 Blade Props (12pcs) - Crystal Purple


Dalprop's newly released CYCLONE T5047C propeller has a new aerodynamic design, increasing acceleration and overall speed. This cutting edge design also makes the DAL 5047C significantly smoother than previous designs which makes it feel much more locked in on turns.

German Bayer PC material is made of a high quality, flexible and durable plastic that is very tough and can easily survive crashes.

Compatible with POPO systems.

Includes 3 full sets:
6x CW props
6x CCW props

$7.95
$7.95


In Stock: Totally in stock right now

DALPROP Cyclone T5047C Cyclone 5" 3 Blade Props (12pcs) - Crystal Turqoise


Dalprop's newly released CYCLONE T5047C propeller has a new aerodynamic design, increasing acceleration and overall speed. This cutting edge design also makes the DAL 5047C significantly smoother than previous designs which makes it feel much more locked in on turns.

German Bayer PC material is made of a high quality, flexible and durable plastic that is very tough and can easily survive crashes.

Compatible with POPO systems.

Includes 3 full sets:
6x CW props
6x CCW props

$7.95
$7.95


In Stock: Totally in stock right now

DALPROP Cyclone T5047C Cyclone 5" 3 Blade Props (12pcs) - Red


Dalprop's newly released CYCLONE T5047C propeller has a new aerodynamic design, increasing acceleration and overall speed. This cutting edge design also makes the DAL 5047C significantly smoother than previous designs which makes it feel much more locked in on turns.

German Bayer PC material is made of a high quality, flexible and durable plastic that is very tough and can easily survive crashes.

Compatible with POPO systems.

Includes 3 full sets:
6x CW props
6x CCW props

$7.95
$7.95


In Stock: Totally in stock right now

DALPROP Cyclone T5050C Cyclone 5" 3 Blade Props (20pcs) - Red


Dalprop high-end CYCLONE series, features faster reaction, easier cornering and less noise, excellent aerodynamics design make them ideal for drone racing. 5mm inner diameter, more durable and gives you a better chance of staying in the air after hitting that ghost branch.

Available in packs of 20pcs (10CW & 10CCW / 5 sets of 4)

$12.00
$12.00


In Stock: Totally in stock right now

DALPROP FOLD F5 Folding Prop - Blue


The all new folding style props from DALPROP!

Weight 4.2g
Pitch 4.75
Blade 3
Size of Prop 5.1"
Material PC
Height of Hub 7mm
Shaft 5mm
Package 4 hubs & 12 blades; 2 x CW 2 x CCW

$6.50
$6.50


In Stock: Totally in stock right now

DALPROP FOLD F5 Folding Prop - Green


The all new folding style props from DALPROP!

Weight 4.2g
Pitch 4.75
Blade 3
Size of Prop 5.1"
Material PC
Height of Hub 7mm
Shaft 5mm
Package 4 hubs & 12 blades; 2 x CW 2 x CCW

$6.50
$6.50


In Stock: Totally in stock right now

DALPROP FOLD F5 Folding Prop - Grey


The all new folding style props from DALPROP!

Weight 4.2g
Pitch 4.75
Blade 3
Size of Prop 5.1"
Material PC
Height of Hub 7mm
Shaft 5mm
Package 4 hubs & 12 blades; 2 x CW 2 x CCW

$6.50
$6.50


In Stock: Totally in stock right now

DALPROP FOLD F5 Folding Prop - Purple


The all new folding style props from DALPROP!

Weight 4.2g
Pitch 4.75
Blade 3
Size of Prop 5.1"
Material PC
Height of Hub 7mm
Shaft 5mm
Package 4 hubs & 12 blades; 2 x CW 2 x CCW

$6.50
$6.50


In Stock: Totally in stock right now

DALPROP FOLD F5 Folding Prop - Red


The all new folding style props from DALPROP!

Weight 4.2g
Pitch 4.75
Blade 3
Size of Prop 5.1"
Material PC
Height of Hub 7mm
Shaft 5mm
Package 4 hubs & 12 blades; 2 x CW 2 x CCW

$6.50
$6.50


In Stock: Totally in stock right now

DALPROP NEPAL N1 Freestyle Prop - Blue


The Nepal N1 is intended to be a cinematic/freestyle prop. It boasts features such as a low 3.78g weight, low pitch, high response and somewhat smoother control.

Specifications:

5.1"
3.78g
Supposed to have a pitch of 4.35"
Made from Polycarbonate
6mm hub thickness

Recommended Use:

5” quad
2306 motor in 1750-1900kv
6S for power
4S for cinematic and smooth flying with high control and precision
AUW 540-670g range recommended

$4.80
$4.80


In Stock: Totally in stock right now