Product Search

HGLRC XJB F428-TX20 Omnibus F4 Flight Controller 28A 2-4S Blheli_S ESC Switchable VTX


So much power in such a small package!

The XJB stack represents incredible value, all jam-packed into a 20x20 format. Featuring betaflight OSD, switchable VTX with pitmode and a clean non swamping signal. 28A 4in1 ESC and enough CPU power to run 8k x 8k!

Specifications:

Model: HGLRC XJB F428-TX20
Weight: 6.5g
Usage: for 65mm-250mm Frame Kit
Micro F4 Flight Controller Board (with D-SHOT)

MPU: MPU6000-SPI
CPU: STM32F405RGT6, dual 8K.
Betaflight target: OMNIBUSF4
Black Box: Flash 16M
Input Voltage: 2-4S Lipo
Built-in Betaflight OSD to adjust PID
BEC Output: 5V@3A
Size: 25x25mm board, 20mm mounting holes (M2)
Weight:2.3g
Supports SBUS/PPM/DSMX receivers

28A 2-4S Blheli_S BB2 4 in 1 ESC:

Input Voltage: 2-4S Lipo battery
Constant Current: 28A
Peak Current: 35A
Firmware: BLheli_S 16.5
Size: 27x27mm (mainboard)
31x31mm ( including pad)
Installing Hole: 20x20mm, M2
Weight: 4.2g
CPU: SILABS EFM8BB2 48MHZ
MOS Tube: TOP QUALITY MOSFET
Firmware: BL-Heli 16.5
Supports, Damped Mode, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, forward and reverse
HGLRC XJB-TX20 Mini FPV Transmitter

Output power: 0/25mW/100mW/250mW switchable
BAT: 7-24V,BEC 5V-3A
170mA----250mW
120mA----100mW
80mA----25mW
Video system: NTSC/PAL
Antenna: IPEX
Frequency: 5.8GHz 9 bands 72 channels, with Raceband
Size: 23*23mm(L*W),Hole:20*20mm
Weight: 2.2g
Package Includes:

1x HGLRC F4 AIO OSD BEC Flight Controller Board
1x HGLRC 28A Blheli_S 4 In 1 ESC
1x HGLRC XJB-TX20 Mini FPV Transmitter
1 x IPEX Dipole Antenna
1 x Standoff Kit
Warning: As with all video transmitters, do not power up the unit unless you have the antenna connected. Powering up a video transmitter with the no antenna will destroy the transmitter.

Note: Incorrect soldering techniques will damage this board and possibly void warranty. Please use the correct sized tip, temperature and technique. Temp controlled soldering irons (such as the TS100) are available for under $100 and will make soldering much easier.

$94.95
$94.95


In Stock: Sorry bro, Sold out

HP-WR-002 Hyperion Universal Female Servo Lead 300mm


HP-WR-002 Hyperion Universal Female Servo Lead 300mm

$3.30
$3.30


In Stock: Totally in stock right now

HP-WR-005 Hyperion Servo Extension Lead 300mm


HP-WR-005 Hyperion Servo Extension Lead 300mm

$4.30
$4.30


In Stock: Totally in stock right now

HP-WR-006 Hyperion Servo Extension Lead 600mm


HP-WR-006 Hyperion Servo Extension Lead 600mm

$5.10
$5.10


In Stock: Totally in stock right now

HP-WR-007 Hyperion Servo Extension Lead 1000mm


HP-WR-007 Hyperion Servo Extension Lead 1000mm

$6.00
$6.00


In Stock: Totally in stock right now

HP-WR-009 Hyperion Light Servo Extension Lead 200mm


HP-WR-009 Hyperion Light Servo Extension Lead 200mm

$3.70
$3.70


In Stock: Totally in stock right now

HP-WR-010 Hyperion Light Servo Extension Lead 300mm


HP-WR-010 Hyperion Light Servo Extension Lead 300mm

$4.50
$4.50


In Stock: Totally in stock right now

HP-WR-011 Hyperion Light Servo Extension Lead 500mm


HP-WR-011 Hyperion Light Servo Extension Lead 500mm

$4.60
$4.60


In Stock: Totally in stock right now

HP-WR-014 Hyperion Light Y Lead Connector 180mm


HP-WR-014 Hyperion Light Y Lead Connector 180mm

$8.40
$8.40


In Stock: Totally in stock right now

HXT Micro T-Connector Style Plugs


HXT Micro T-Connector Style Plugs

Great for small applicaions like tiny helicopters and foam planes.

Includes: 1x pair of plugs.

$3.00
$3.00


In Stock: Sorry bro, Sold out

HYPERdrive clutch bearing set(2)


Note: Always inspect clutch bearings for damage after a crash. Bearings should always engage without backlash. To replace bearing you will need to use a 3mm SHCS to offset inside the coupler(there is a gap between the bearing and the bottom of the bearing bore). You can then use a spare shaft to press out the bearing. Note the bearing orientation when pressing it back in. If you do not have access to an arbor press, we recommend just purchasing a replacement coupler with bearing.

$15.00
$15.00


In Stock: Totally in stock right now

Hyperion 2x Gold 3.5mm Connector with insulators


HP-FG-CON35-2P
Hyperion 2x Gold 3.5mm Connector with insulators

�Ideal for Hyperion FG LiFE receiver packs

$4.80
$4.80


In Stock: Totally in stock right now

Hyperion Balance Board 2S-7S - TP/FP Style


Hyperion Balance Board for 7S chargers such as the Super Duo and EOS 0720i chargers. For use with 2S-7S batteries. Board only - for use with batteries such as Thunder Power, Flightpower, Outrage and other similar types.

$7.00
$7.00


In Stock: Totally in stock right now

Hyperion EOS Sentry Battery Checker V3


The Latest 2016 Model Hyperion Sentry 3 Battery Balancer, Checker, and Discharger

Product Description
The EOS Sentry3 is a quick, clever, and convenient device for analyzing your batteries. The Sentry3 shows at a glance the remaining capacity in your battery pack, cell balance, cell voltages and gap.Stand-alone Balance and Store Modes at industry-leading discharge performance.Sentry 3 provides the information and tools you need to maintain top performance and reliability from your batteries, and to avoid costly mistakes.

Features
2S ~ 8S Battery compatible with HvLi LiPo, Standard LiPo, LiFe. NiCd, and NiMh capable

EOS Sentry 3 displays the total battery pack voltage and a percentage bar graph for estimated remaining capacity

View screens for Minimum and Maximum cell voltages, and max cell Gap

Store Mode allows you to discharge your battery to 3.8V (Discharge rate is a powerful 150mah)
Balance Mode tunes your pack for performance automatically

5 ~ 25V auxiliary input voltage check port using JST 2-pin connectors on pack side
Large clear display and easy-to-use menu

Powered from the battery pack you connect for testing. No batteries needed for device.
Store Mode: Allows you to discharge your HvLi, LiPo, LiFe to 3.8V for storage. Discharge rate for Store mode is 150mah and will cutoff to 3.8V.

Balance Mode: Will automatically discharge the individual lithium-based cells such that they are closely balanced, if balance can be obtained while all cells remain at or above 3.8V.

This battery checker is compatible with JST-XH balance adapter when you use directly otherwise require each type of balance board adapter.

In order to use Sentry 3 with the legacy Hyperion G3 packs with Hyperion-style balance connector, connect the battery Sentry 3 via HP-EOSLBA-26CBL cable + HP-EOSLBA-26HP-B multi-adapter board or HP-EOSLBA-7UCBL cable + HP-EOSLBA-7U-B multi-adapter board.

These cable&adapter sets are included with Hyperion 6S and 7S chargers.Hyperion G3 packs produced after mid-2014 and all Hyperion G6 HvLi packs use XH balaance connectors and need no adapters to the Sentry 3.

NiMh can be checked between 5V~25V using JST connector

$35.00
$35.00


In Stock: Totally in stock right now

Hyperion G3 CX 11.1V 3S 120mAh 25C/45C Battery


* Weight: 16g
* Dimensions: 39 x 22 x 17 mm
* G3 Technology Lipo
* Capacity and Resistance Matched Cells
* 5C Speed Charging OK
* 4 x Longer Cycle Life

Hyperion Generation 3 Lithium Polymer Packs are proving truly revolutionary in both performance and value. Compared to an average of the batteries on market last year, they provide up to up to 4x more cycles under the same discharge conditions. And that makes them a bargain price-wise.

But they also deliver the highest voltage and flattest discharge curves under load that we have ever seen, which makes them the best performer you can buy. And tests have shown that at the 70%-discharged point in flight, they are delivering as much as 40% more power than previous generation LiPo.

The fact that they can be safely charged at up to 5C rates - for charge times as low as 10 to 12 minutes - is just icing on a very tasty cake.

The G3 packs depend on a new Hybrid RS construction technology, super-fine substrate materials, and a rigorous Quality Control and cell matching process, in order to guarantee you not only this superb performance, but also tightly balanced and long-lasting packs.

The G3 LiPo come in two series. "CX" 25C are appropriate for most models and deliver high capacity and power per gram at low cost. The "VX" 35C series is the one for applications that need the highest possible voltage maintained at high discharge rates; for example highly aerobatic 3D airplanes and helicopters, competition gliders, pylon racers, and some EDF jets.

Check'm out, you'll be glad you did.

*Note, picture is of the 2S Battery

$18.00
$18.00


In Stock: Totally in stock right now

Hyperion G3 CX 11.1V 3S 450mAh 25C/45C Battery


•Weight: 42g
•Dimensions: 58 x 32 x 17.5 mm
•G3 Technology Lipo
•Capacity and Resistance Matched Cells
•5C Speed Charging OK
•4 x Longer Cycle Life
Hyperion Generation 3 Lithium Polymer Packs are proving truly revolutionary in both performance and value. Compared to an average of the batteries on market last year, they provide up to up to 4x more cycles under the same discharge conditions. And that makes them a bargain price-wise.

But they also deliver the highest voltage and flattest discharge curves under load that we have ever seen, which makes them the best performer you can buy. And tests have shown that at the 70%-discharged point in flight, they are delivering as much as 40% more power than previous generation LiPo.

The fact that they can be safely charged at up to 5C rates - for charge times as low as 10 to 12 minutes - is just icing on a very tasty cake.

The G3 packs depend on a new Hybrid RS construction technology, super-fine substrate materials, and a rigorous Quality Control and cell matching process, in order to guarantee you not only this superb performance, but also tightly balanced and long-lasting packs.

The G3 LiPo come in two series. "CX" 25C are appropriate for most models and deliver high capacity and power per gram at low cost. The "VX" 35C series is the one for applications that need the highest possible voltage maintained at high discharge rates; for example highly aerobatic 3D airplanes and helicopters, competition gliders, pylon racers, and some EDF jets.

Check'm out, you'll be glad you did.

$21.50
$21.50


In Stock: Totally in stock right now

Hyperion G3 CX 7.4V 2S 120mAh 25C/45C Battery


Hyperion G3 CX - 2S 120mAh (25C)

•Weight: 11g
•Dimensions: 38 x 22 x 11.5 mm
•G3 Technology Lipo
•Capacity and Resistance Matched Cells
•5C Speed Charging OK
•4 x Longer Cycle Life
Hyperion Generation 3 Lithium Polymer Packs are proving truly revolutionary in both performance and value. Compared to an average of the batteries on market last year, they provide up to up to 4x more cycles under the same discharge conditions. And that makes them a bargain price-wise.

But they also deliver the highest voltage and flattest discharge curves under load that we have ever seen, which makes them the best performer you can buy. And tests have shown that at the 70%-discharged point in flight, they are delivering as much as 40% more power than previous generation LiPo.

The fact that they can be safely charged at up to 5C rates - for charge times as low as 10 to 12 minutes - is just icing on a very tasty cake.

The G3 packs depend on a new Hybrid RS construction technology, super-fine substrate materials, and a rigorous Quality Control and cell matching process, in order to guarantee you not only this superb performance, but also tightly balanced and long-lasting packs.

The G3 LiPo come in two series. "CX" 25C are appropriate for most models and deliver high capacity and power per gram at low cost. The "VX" 35C series is the one for applications that need the highest possible voltage maintained at high discharge rates; for example highly aerobatic 3D airplanes and helicopters, competition gliders, pylon racers, and some EDF jets.

Check'm out, you'll be glad you did.

$9.90
$9.90


In Stock: Totally in stock right now

Hyperion G3 CX 7.4V 2S 450mAh 25C/45C Battery


•Weight: 29g
•Dimensions: 57 x 32 x 12 mm
•G3 Technology Lipo
•Capacity and Resistance Matched Cells
•5C Speed Charging OK
•4 x Longer Cycle Life
Hyperion Generation 3 Lithium Polymer Packs are proving truly revolutionary in both performance and value. Compared to an average of the batteries on market last year, they provide up to up to 4x more cycles under the same discharge conditions. And that makes them a bargain price-wise.

But they also deliver the highest voltage and flattest discharge curves under load that we have ever seen, which makes them the best performer you can buy. And tests have shown that at the 70%-discharged point in flight, they are delivering as much as 40% more power than previous generation LiPo.

The fact that they can be safely charged at up to 5C rates - for charge times as low as 10 to 12 minutes - is just icing on a very tasty cake.

The G3 packs depend on a new Hybrid RS construction technology, super-fine substrate materials, and a rigorous Quality Control and cell matching process, in order to guarantee you not only this superb performance, but also tightly balanced and long-lasting packs.

The G3 LiPo come in two series. "CX" 25C are appropriate for most models and deliver high capacity and power per gram at low cost. The "VX" 35C series is the one for applications that need the highest possible voltage maintained at high discharge rates; for example highly aerobatic 3D airplanes and helicopters, competition gliders, pylon racers, and some EDF jets.

Check'm out, you'll be glad you did.

$14.00
$14.00


In Stock: Totally in stock right now

Hyperion G3 LiFePO4 2-pin EHR Transmitter Adapter


G3 LiFePO4 Pack Connector for transmitters which use the 2-pin EHR connector, such as JR 9x series

$4.50
$4.50


In Stock: Totally in stock right now

Hyperion G3 LiFePO4 3-pin Servo Plug Adapter


G3 LiFePO4 Pack Connector for all Receivers and any Transmitter which uses this 3-pin standard servo plug

$4.50
$4.50


In Stock: Totally in stock right now

Hyperion G3 LiFePO4 Charge Leads


Hi-Rate Charge Cable for G3 LiFePO4 Radio Packs

$5.50
$5.50


In Stock: Totally in stock right now

Hyperion LiFePO4 6.6V 850mAh Receiver Battery


Weight: 48.8 g
Dimensions: 54.5 x 29.5 x 15.4 (LxWxH)
See full datasheet
LiFePO4 Receiver Power Pack, with high-rate 3.5mm gold charge/discharge plugs, and Hyperion-style Balance Tap.

Almost all receiver power packs today are made using NiMH cells. Many users have noted the much higher capacity or lighter weight of Lipo cells, but LiPo have voltage "too high" (3.7V/cell) to work reliably with most receivers, and servos.

But unlike LiPo, LiFePO4 cells (3.3V/cell) can be an excellent replacement for NiMH on voltage basis. And compared to high-capacity NiMH packs, the Hyperion G3 LifePO4 Radio batteries have these other advantages:
More capacity per gram, meaning lighter models in flight
Almost no "self discharge", so your radio system is always ready to go even weeks after charging.
Superior voltage performance under load, so your servos perform with more consistent torque and speed.
Faster charge time
SERVOS
Many servos on the market, and particularly many of the lower-cost analog types, cannot operate at the voltage supplied by these LiFe Receiver packs. Attempting to use a servo rated for maximum of 6V or less WILL RESULT in reduced servo life, and may lead to in-flight failure. Any such failure is the sole responsibility of the user.

All current Hyperion ATLAS Digital servos (except DS09 and DS11 series) can accept the voltage supplied by the G3 LiFe receiver packs. If servo loads are especially high, such as with heli collective servos used in hard 3D, you may see slightly reduced lifespan in trade for higher torque and speed output.

If you have any concerns about the voltage rating of your servos, you may choose to run one or several BEC units, such as the 5V/6V selectable Hyperion SBEC (HP-TICOOL-BEC), in order to regulate voltage down to suit your servos.

CAUTION
These packs are LiFePO4 chemistry. Only charge them on quality chargers - such as Hyperion EOS line - which have a dedicated charge routine for LifePO4 cells. The only exception is the Transmitter packs with PCM, which may be charged while in the transmitter, using the standard wall charger supplied by the Tx maker.
NEVER attempt to charge damaged packs.
Read all cautions on product packaging before using these packs.

$21.50
$21.50


In Stock: Totally in stock right now

HyperLite Deluxe Package 4mm Chamfered Edge Arms


This is the Pyro Drone HyperLite. A competitive mini size FPV racing frame. It's designed purely for racing with its stretched X geometry which gives it great handling in corners and turns.

Features:

- 205.3mm stretched “X” geometry ­ as long as a 6” but wide as a 5"
- Multi Unit construction with minimal hardware (It’s better than a unibody frame.)
- Structurally stiffer than typical designs unibody frame.
- 65g of CF, 9g hardware in the 4mm version
- Arms cut along the carbon weave for significantly increased stiffness and strength
- Low Vtx antenna mount with option to tie mast to top plate
- Pigtail Vtx antenna mount, no more broken VTx’s
- Battery connector stress relieving tie down
- Lightest possible HD camera mount
- Easy to work on electronics layout. Access to your Vtx to change channels
- Easy to change battery and HD camera straps
- Motor bumpers that don’t cause too much drag or add weight
- 1 x LED system for under arm illumination (Matek 5050/16V part #3195 with Tpu protection case ) Black Color
- 1 x TPU FPV camera mount with integrated RX antenna tube holes (tubes not included) Black Color
- 1 x Matek Mini power hub PDB Part #3067

$75.00
$75.00


In Stock: Totally in stock right now

HyperLite F4 OSD + Spedix GS40 4in1 Combo


A combo of a sweet FC and sweet 4in1 ESC

Here's the FC on its own: HyperLite F4 OSD Flight Controller

Here's the ESC on its own: Spedix 4in1 Brushless ESC 6s 40A BLHeli32

You can simply plug these together, the correct cable is provided to interact between the two, just add your motors, VTX, RX and Cam on top.

Used by most of the CMRC Goons, reliable, powerful and easy to setup!

$119.00
$119.00


In Stock: Totally in stock right now

HyperLite F4 OSD Flight Controller


One of the most popular FC’s is back and better than ever, combining an industry favorite layout with new feature sets for freestyle, long range, and racers. Finally, a board for every pilot!

The new Hyperlite F4 OSD takes the same celebrated ‘flat-bottomed’ layout (crucial for clean and tight builds) and adds a much appreciated OSD and SIX UART ports (more than any other board on the market!) for GPS, RX, SmartAudio, and even Camera Control.

And with more features, comes improved ease of use with a built-in 4-in-1 ESC socket and included harnesses for HobbyWing, AiKON AK32, and Spedix GS35 4in1 ESCs. The built-in solder pads mirror the 4in1 pad layout, so you can easily connect ANY ESC to this board to get features like current sensing and ESC telemetry (for the BL32 guys).

PLEASE NOTE: The Hyperlite F4 OSD uses it’s own BF target .bin, “PYRODRONEF4”.

Specifications:

MPU6000 Gyro
STM32F405 CPUE @ 168mhz, can be overclocked
2-6S direct battery input
3.3V 100ma, 5V 1.2A BEC
5V Camera Power
Built in configurable Betaflight OSD
Flat bottom PCB for SUPER CLEAN builds
36x36 PCB with 30.5x30.5 mounting holes
6 UARTS. UART1 (INVERTER FOR SBUS),
UART2 (FREE),
UART3 (INVERTED TELEMETRY),
UART4 (Free),
UART5 (Smart Audio)
UART4 (Free)
Built in 4 IN 1 ESC socket(including ESC telemetry, External current sensor)
Plug and plug with the most popular 4-in-1 ESCs (HobbyWing, Airbot, Spedix, Aikon),with supplied cables
Built in solder pads mirror of the 4-in-1 ESC socket
Printed layout instructions ON the board - no need for instructions!

Please de-pin the esc side carefully using exacto knife or pair of fine tip tweezers. Please refer ESC connection photos.

Important Notes:

Before soldering or mounting any flight controller, connect it to your PC and verify operation Incorrect soldering techniques will damage this board and void warranty. Please use the correct sized tip, temperature and technique. Temp controlled soldering irons (such as the TS100) are available for under $100 and will make soldering much easier

Lifted pads are a result of incorrect soldering techniques or excess mechanical pressure and will not be covered under warranty.

USB ports must be handled with care, breakage of usb ports are not covered under warranty

Always use a smoke stopper before powering your build for the first time.

$45.00
$45.00


In Stock: Totally in stock right now

HyperLite Floss 3.0 Racing Frame 5 Inch


The Floss 3.0 is designed FOR racers BY racers as the next evolution of the most popular racing frame. Based around a high quality,anodized 7075 aluminum core, the frame features sandwich plates and individual, interlocking, easy to change arms to prevent arm wiggle along with a host of other modern features (and goodies!).

Features

69.5g WITH hardware
Soft edge 5mm carbon arms to achieve goals of chamfering without loss of strength
Machined channels in the aluminum plate prevent arm wiggle
Arms can be easily removed with only 2 screws
Countersunk bottom plate screws
Allows for 20x20 or 3030 stacks
Up to 85+ degrees of tilt

Also includes:

1 x Spare arm
3M anti slip battery pad
TPU micro FPV camera mount
TPU SMA mount

$72.00
$72.00


In Stock: Totally in stock right now

HyperLite Floss 3.0 Racing Frame Hybrid


There is a very good reason most of the fast racers including the current 2018 MGP Champion are running Hybrid setup (5" front arms 6" rear arms)
It is the perfect setup that gets rid of the dirty air to the rear props and provides amazing cornering.

The Floss 3.0 is designed FOR racers BY racers as the next evolution of the most popular racing frame. Based around a high quality, anodized 7075 aluminum core, the frame features sandwich plates and individual, interlocking, easy to change arms to prevent arm wiggle along with a host of other modern features (and goodies!).

-69.5g WITH hardware
-Soft edge 5mm carbon arms to achieve goals of chamfering without loss of strength
-Machined channels in the aluminum plate prevent arm wiggle
-Arms can be easily removed with only 2 screws
-Countersunk bottom plate screws
-Allows for 20x20 or 3030 stacks
-Up to 85+ degrees of tilt
-Also includes:

-3M anti slip battery pad
-TPU micro FPV camera mount
-TPU SMA mount

$75.00
$75.00


In Stock: Totally in stock right now

IBCrazy 1.3Ghz Air-Blade Antenna Set (LHCP)


1.3 GHz Airblade LHCP antenna from Video Aerial Systems!

Contains:

2x Air-Blade Antennas
2x Right Angle SMA Adapters
ABS Torque Wrench
Specifications:

Connector type: SMA male
Whip length: 2″/5cm
Please take note which type of connector your transmitter and receiver have installed. If you overlook this, you can damage your transmitter. Issues due to this are not covered under warranty.

$45.00
$45.00


In Stock: Totally in stock right now

IBCrazy 433/1.3 Notch Filter


Notch filter from IBCrazy. Use this on your 433MHz RC transmitter to filter out interference in the 1.2-1.3GHz spectrum.

$29.50
$29.50


In Stock: Totally in stock right now

IBCrazy 5.8 GHz Airblade RaceSpec Antenna LHCP


Designed with the Professional FPV racer in mind, these antennas combine small form and high durability with top-notch performance for the ultimate competitive advantage. These antennas have strengthened cables with a special low profile choke to ensure the highest axial ratio and video clarity. While they do run exposed, the antennas have a large reinfored nylon hub at the feed which will allow a racer to repeatedly bend them back to shape and fly again after many crashes.

Specifications:
Gain: 1.5dbic
Axial Ratio: .79

Polarization: Left Hand Circular (LHCP)

Package includes: 1- Airblade RaceSpec antenna, 1-RPSMA adapter, 1- VAS Finger Wrench

$26.00
$26.00


In Stock: Totally in stock right now

IBCrazy 5.8 GHz Biquad Linear Antenna


VAS Video Aerial Systems 5.8GHz BIQUAD 11dbic Antenna

$35.00
$35.00


In Stock: Totally in stock right now

IBCrazy 5.8 GHz Cyclone Antenna Set (LHCP)


The Cyclone antenna is the highest performing Omni Directional antenna at the entry level price point. While the Cyclone has a Gain of only 0.71dbic it boasts a mind blowing Axial Ratio of 0.94 making it the most Circular Omni Directional antenna on the market at any price point.

Originally designed with the Professional Aerial Photographer in mind, the Cyclone’s Axial Ratio makes the Cyclone ideal for the Hobbyist looking to fly in previously “un-flyable” terrain or environments. Indoor, Underground and Urban flying present special circumstances that the Hobbyist must find “work-around” to fly comfortably, the Cyclone excels in these types of environments. We recommend only experienced pilots place the Cyclone on their Race Quads, but anyone flying Fixed Wing or larger AP platforms will love the performance of this antenna and should have this RF marvel in their arsenal.

Durability may be an issue for those newer race pilots who tend to crash a lot, and is therefore not recommended as a beginner transmit antenna, unless mounted to the vehicle per our instructions. The Cyclone makes on heck of a receiver antenna and anyone looking for a new one should take a serious look at the Cyclone. The Cyclone can be used as a Transmit or Receive antenna, no need to question which one of the pair goes where.

Specifications:
Gain: 0.71dbic
Axial Ratio: .94

Package includes: 2- Cyclone antennas, 2- RPSMA adapters, 2- VAS finger wrenches

$35.00
$35.00


In Stock: Totally in stock right now

IBCrazy 5.8 GHz Cyclone Antenna Set (RHCP)


The Cyclone antenna is the highest performing Omni Directional antenna at the entry level price point. While the Cyclone has a Gain of only 0.71dbic it boasts a mind blowing Axial Ratio of 0.94 making it the most Circular Omni Directional antenna on the market at any price point.

Originally designed with the Professional Aerial Photographer in mind, the Cyclone’s Axial Ratio makes the Cyclone ideal for the Hobbyist looking to fly in previously “un-flyable” terrain or environments. Indoor, Underground and Urban flying present special circumstances that the Hobbyist must find “work-around” to fly comfortably, the Cyclone excels in these types of environments. We recommend only experienced pilots place the Cyclone on their Race Quads, but anyone flying Fixed Wing or larger AP platforms will love the performance of this antenna and should have this RF marvel in their arsenal.

Durability may be an issue for those newer race pilots who tend to crash a lot, and is therefore not recommended as a beginner transmit antenna, unless mounted to the vehicle per our instructions. The Cyclone makes on heck of a receiver antenna and anyone looking for a new one should take a serious look at the Cyclone. The Cyclone can be used as a Transmit or Receive antenna, no need to question which one of the pair goes where.

Specifications:
Gain: 0.71dbic
Axial Ratio: .94

Package includes: 2- Cyclone antennas, 2- RPSMA adapters, 2- VAS finger wrenches

$45.00
$45.00


In Stock: Sorry bro, Sold out

IBCrazy 5.8 GHz ION Antenna LHCP


The Ion antenna is a high gain Circularly Polarized omnidirectional antenna with near perfect axial ratio. The Ion’s compact size and light weight make it ideal for those who want a small antenna without sacrificing performance. The Ion is the highest gain, non-phased/stacked, omnidirectional 5.8GHz antenna on the market today. Whether used as a transmit or receiver antenna, the Ion will provide excellent video. We went to great lengths to design the next great antenna for FPV operators the world over. The Patent Pending technology utilized in the Ion is a result of 6 months of design and development that allows us to provide the user a durable, high performance antenna at an affordable price. Assembled in the Video Aerial Systems manufacturing facility located in Virginia, USA from parts acquired in the US and abroad, the Ion antenna is put through the most rigorous testing of any antenna on the market. Each antenna is tested no less than 4 times during the manufacturing process, for both Axial ratio and VSWR to ensure the antenna leaves the production floor at its peak performance level. The Ion is then subjected to our strict Quality Control team’s scrutiny.

Specifications:
Gain: 2.5dbic
Axial Ratio: .88
Polarization: Left Hand Circular (RHCP)

Package includes: 1- Ion Antenna, 1- VAS Finger Wrench

Part Number: ION-5G8-L

$26.00
$26.00


In Stock: Totally in stock right now

IBCrazy 5.8 GHz ION Antenna RHCP


The Ion antenna is a high gain Circularly Polarized omnidirectional antenna with near perfect axial ratio. The Ion’s compact size and light weight make it ideal for those who want a small antenna without sacrificing performance. The Ion is the highest gain, non-phased/stacked, omnidirectional 5.8GHz antenna on the market today. Whether used as a transmit or receiver antenna, the Ion will provide excellent video. We went to great lengths to design the next great antenna for FPV operators the world over. The Patent Pending technology utilized in the Ion is a result of 6 months of design and development that allows us to provide the user a durable, high performance antenna at an affordable price. Assembled in the Video Aerial Systems manufacturing facility located in Virginia, USA from parts acquired in the US and abroad, the Ion antenna is put through the most rigorous testing of any antenna on the market. Each antenna is tested no less than 4 times during the manufacturing process, for both Axial ratio and VSWR to ensure the antenna leaves the production floor at its peak performance level. The Ion is then subjected to our strict Quality Control team’s scrutiny.

Specifications:
Gain: 2.5dbic
Axial Ratio: .88
Polarization: Right Hand Circular (RHCP)

Package includes: 1- Ion Antenna, 1- VAS Finger Wrench

Part Number: ION-5G8-R

$26.00
$26.00


In Stock: Totally in stock right now

IBCrazy 5.8 GHz Minion Antenna UFL (RHCP)


After nearly a year on the market, the Ion finally has a little brother, the Minion!

The Minion features a more compact size (half as large) and slightly reduced gain than the original Ion. Packing a gain of 2.25dbic, the Minion may be just slightly underpowered when compared to the Ion, but it still outperforms the competition in range and performance. The axial ratio does not suffer in the Minion either with a near perfect Axial ration like the Ion, you can expect the Minion to stop multipathing in its tracks. But there is more! The largest critique of the original Ion was aimed at the Ion’s rather large nulls. VAS listened and worked diligently to close these nulls to more manageable sizes. With time and perseverance, they were able to all but close the nulls. This is great news for pilots as now they can bank their aircraft with little worry of the null being exposed.

Specifications;

Gain: 2.25dbic
Polarization: Right Hand Circular (RHCP)
Connector: SMA, MMCX or UFL (select from drop down before adding to cart)
Weight: 6.1g (SMA) 2.3g (UFL) 2.8g (MMCX)
Length: 56mm (SMA) 105mm (UFL) 105mm (MMCX)

Includes;

1 x Minion Antenna
1 x Finger tightener (SMA only)

$22.00
$22.00


In Stock: Totally in stock right now

IBCrazy 5.8 GHz Rotor Antenna (RHCP)


Designed as a smaller, more durable alternative to the Cyclone while still retaining the same stellar performance. The Rotor is approximately 20% smaller than the Cyclone you have seen in the past. Durability tests show it to be far and beyond more durable than the Cyclone and even rivaling the Duraspec lineup. Believe me when I say, it was a blast trying to destroy these antennas. The Rotor antenna boasts the exact same specs as the Cyclone in a smaller and lighter package. So that crazy high axial ratio translates from the Cyclone to its little brother the Rotor. And like all VAS antennas the Rotor goes through rigorous testing and quality control measures before ever seeing the darkness of packaging, so you can be sure the antenna will perform as expected straight out of the box. And like all VAS products the Rotor is backed by US support and an unrivaled Warranty program.

PACKAGE CONTAINS:
- 1x RHCP Rotor Antenna with SMA connector
- 1 x VAS finger wrench
SPECIFICATIONS:
- Gain: 0.6dbic
- Axial ratio: 0.94

$29.00
$29.00


In Stock: Totally in stock right now

IBCrazy 5.8Ghz 10dBic Crosshair Antenna (LHCP) V3


The Crosshair antenna is a 10dbic directional antenna with exceptionally high axial ratio (.98). Suitable for long distance transmission where range and object penetration are required.

Specifications:
Gain: 10dbic
Axial Ratio: .98
Beam width: 115 degrees
-3db point: +/- 35 degrees
Polarization: Right Hand Circular (LHCP)

Package includes: 1- Crosshair Antenna, 1- 45degree SMA Adapter, 1- VAS Finger Wrench

$39.95
$39.95


In Stock: Sorry bro, Sold out

IBCrazy 5.8Ghz 10dBic Crosshair Antenna (RHCP) V3


The Crosshair antenna is a 10dbic directional antenna with exceptionally high axial ratio (.98). Suitable for long distance transmission where range and object penetration are required.

Specifications:
Gain: 10dbic
Axial Ratio: .98
Beam width: 115 degrees
-3db point: +/- 35 degrees
Polarization: Right Hand Circular (RHCP)

Package includes: 1- Crosshair Antenna, 1- 45degree SMA Adapter, 1- VAS Finger Wrench

$39.95
$39.95


In Stock: Sorry bro, Sold out

IBCrazy 5.8Ghz 12.5dBi 10 Turn Helical Antenna (RHCP)

For insane range on 5.8GHz! (It's best to be using an antenna tracker with this antenna)

12.5dBic Gain

Frequency range: 5600-5980Mhz

$37.00
$37.00


In Stock: Totally in stock right now